Tripp Lite U230-204-R Features, Installation, Top Panel, Back Panel, D External Power Supply Jack

Features

Top Panel

A Push-Buttons

A

USB 2.0 SHARE SWITCH with FILE TRANSFER

Model: U230-204-R

1 2 3 4

FILE

TRANSFER

Back Panel

B Computer Connection Ports

C USB Device Ports

D External Power Supply Jack B C B D

Installation

Note: The driver must be installed before connecting your computers to the device.

1.Insert the CD into the first computer’s disc drive. Driver installation should begin automatically. If the installation does not begin automatically, navigate to and double-click on the Setup.exe file located on the CD.

2.Follow the prompts that are displayed throughout the installation process, ending with the prompt to finish the installation. After the installation is finished, you may be prompted to restart your computer. If this prompt comes up, click Yes.

3.Repeat these steps on the second computer to be connected to the device.

4.Connect the included power supply to the device and plug it into an appropriate power source. To help protect your system from sudden, transient increases and decreases in electrical power, it is recommended that you plug your devices into a Tripp Lite Surge Suppressor, Line Conditioner or Uninterruptible Power Supply (UPS).

5.Connect each computer to the device using the included USB cables. The Share Switch icon should now appear in the lower-right corner of your computer screen.

6.Right-click this icon and select Open.

7.You can now connect up to 4 USB devices to the USB ports on the back of the device.

200908017.indb 2 8/28/2009 2:29:40 PM