Package Contents
•2 UPS Communication Cables (Part # 73-1070 and Part # 73-1071)
•1 Owner's Manual
Features
In conjunction with Tripp Lite SmartOnline™ UPS Systems, the UPS Communication Cable Kit For IBM System i Servers protects IBM System i, AS/400 and iSeries Midrange Servers from potential system corruption due to loss of power without prior operating system shutdown. Using a UPS system without a communication cable protects against power failures that do not exceed the battery capacity of the UPS system, but the potential for system corruption still exists as the server drains the UPS system's battery during extended blackouts. When connected to a Tripp Lite UPS System with the appropriate communication cable from this kit, the server can monitor the status of the UPS and initiate an automatic, graceful and orderly unattended system shutdown when necessary.
System Requirements
One of the Following:
•System i, AS/400 or iSeries Server with
•System i, AS/400 or iSeries Server with T1 or T2 Port*
*Requires the use of IBM adapter cable (FC1827; IBM Part # 97P4299). Also requires the complete shutdown of the server and removal of all power cords for a period of 5 minutes immediately prior to installation.
UPS System Compatibility
SmartOnline |
| Communication | |
UPS Systems | Compatible Cable | Port Connection | |
|
|
|
|
1,000 | VA - 3,000 VA | Part # | |
|
|
|
|
5,000 | VA - 10,000 VA | Part # | Dry Contact Port |
|
|
| |
20,000 VA - 80,000 VA | Part # | Dry Contact Port | |
|
|
|
|
2
