5
Features and Controls
120 Volt AC,20 Amp,Duplex Receptacles — May be
used to supply electrical power for the operation of
120Volt AC,20 Amp, single phase, 60 Hz electrical, lighting,
appliance,tool and motor loads.
120/240 Volt AC,30 Amp Locking Receptacle — May
be used to supply electrical power for the operation of
120 and/or 240 Volt AC,30 Amp, single phase, 60 Hz
electrical,lighting, appliance, tool and motor loads.
Air Cleaner — Protects engine by filtering dust and debris
out of intake air.
Choke Lever— Used when starting a cold engine .
Circuit Breakers (AC) — Push to reset circuit breakers are
provided to protect the generator against electrical overload.
Data Tag — Provides model,revision and serial number of
generator.Please have these readily available when calling
for assistance.
FuelTank — Capacity of five (5) U.S.gallons.
Grounding Fastener — If required,please consult a
qualified electrician,electrical inspector, or local agency
having jurisdiction.
Oil Fill — Add engine oil here.
Recoil starter — Used to start the engine.
Rocker Switch — Set this switch to "On" before using
recoil starter.Set switch to "Off" to switch off engine.
Spark Arrester Muffler — Exhaust muffler lowers
engine noise and is equipped with a spark arrester screen.
KNOW YOUR GENERATOR
Read this owner’s manual and safety rules before operating your generator.
Compare this illustration with your generator to familiarize yourself with the locations of various controls and
adjustments.Save this manual for future reference.
120 Volt AC,20 Amp
Duplex Receptacles
Fuel Tank
Choke Lever
Recoil Starter
Rocker Switch
(on engine shroud)
Circuit
Breakers (AC)
120/240 Volt AC,
30Amp
Receptacle
Spark Arrester Muffler
Air Cleaner
Grounding Fastener
Oil Fill
2
Section
Data Tag