WARNING: The operation of any lawn

 

mower can result in foreign objects

2

being thrown into the eyes, which can

damage your eyes severely. Always

 

wear safety glasses while operating

 

the mower, or while performing any

3

adjustments or repairs on it.

Starting Engine

3

 

4

Operating Your Lawn

WARNING: Be sure no one other than the operator is standing near the lawn mower while starting engine or operat- ing mower. Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monox- ide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.

1.Push primer (if equipped) three times. Wait about two seconds between each push. See Figure 4-2. In temperature around 55° F or below, prime five times. Do not prime to restart a warm engine.

2.Standing behind the mower, squeeze the blade control against upper handle. See Figure 4-2.

3.Recoil Start: Grasp recoil starter handle and pull rope out with a rapid, continuous, full arm stroke. See Figure 4-2. Keeping a firm grip on the starter handle, let the rope rewind slowly. Repeat until engine cranks. Let the rope rewind each time slowly.

Electric Start (If Equipped): Turn ignition key to the right to start the engine. Release the key after the engine starts.

3

1

Figure 4-2

WARNING: If you strike a foreign object, stop the engine. Remove wire from the spark plug, thoroughly inspect mower for any damage, and repair damage before restarting and operating. Extensive vibration of mower during operation is an indica- tion of damage. The unit should be promptly inspected and repaired.

1.Once the engine is running, squeeze the drive control against the upper handle to propel mower.

2.For best results, do not cut wet grass.

3.For a healthier lawn, never cut off more than one- third of the total length of the grass.

Mower

WARNING

The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or

Stopping Engine

1.Release blade control to stop the engine and blade.

2.Disconnect spark plug wire from spark plug and ground against the engine.

WARNING: Wait for the blade to stop completely before doing any work on the mower or to remove the grass catcher.

Using Your Lawn Mower

WARNING: Never operate your mower without either the rear door or the entire grass catcher assembly firmly secured.

Be sure lawn is clear of stones, sticks, wire, or other objects which could damage lawn mower or engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal injury to the operator and others.

Using as Mulcher

For mulching grass, remove the grass catcher from the mower. The rear discharge door should be closed.

1.For effective mulching, do not cut wet grass.

2.New or thick grass may require a narrower cut. Adjust ground speed according to condition of lawn.

3.If the grass has been allowed to grow in excess of 4 inches, mulching is not recommended. Use the grass catcher to bag clippings instead.

Using Grass Catcher

You can use the grass catcher to collect clippings while you are operating the mower.

1.Attach grass catcher following instructions on page 7. Grass clippings will automatically collect in bag as you run mower. Operate mower till grass bag is full.

2.Stop engine completely by releasing the blade control. Make sure that the unit has come to a complete stop.

3.Lift discharge door and pull grass bag up and away from the mower to dispose of the grass clippings.

repairs on it.

Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower. Never run engine indoors or

in enclosed, poorly ventilated areas. En- gine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving

parts on engine and

lawn mower.

Page 9
Image 9
Troy-Bilt 440 warranty Starting Engine, Stopping Engine, Using Your Lawn Mower, Using as Mulcher, Using Grass Catcher

440 specifications

The Troy-Bilt 440 is a powerful and versatile lawn mower designed to meet the needs of both residential and commercial users. With its robust build and advanced features, it caters to homeowners with large yards as well as professional landscapers seeking reliability and efficiency in their equipment.

One of the standout features of the Troy-Bilt 440 is its reliable and efficient engine. Powered by a high-performance engine, it provides ample power to tackle even the toughest mowing tasks. The engine is designed for quiet operation while offering enough torque to handle thick grass and uneven terrain with ease. This enhances the mowing experience, allowing users to focus on achieving a well-manicured lawn without the noise typically associated with heavy-duty mowers.

The Troy-Bilt 440 is equipped with a wide cutting deck, allowing for a broader mowing path. This feature significantly reduces mowing time and increases productivity, making it ideal for larger properties. The cutting deck also employs a multi-blade system, which ensures a clean and precise cut. Users can also adjust the cutting height easily, providing flexibility to customize the grass length according to personal preference.

Another defining characteristic of the Troy-Bilt 440 is its innovative technologies. The mower features a self-propelled drive system, enabling users to maintain a consistent pace without the need for excessive physical effort. This not only minimizes fatigue during extended mowing sessions but also enhances maneuverability, making it easier to navigate around obstacles, flowerbeds, and garden paths.

The Troy-Bilt 440 also prioritizes user comfort and convenience. A cushioned seat, ergonomic controls, and easy-to-reach levers contribute to a user-friendly experience. Additionally, the mower includes ample storage options for tools and accessories, enhancing the overall practicality of the design.

Furthermore, maintenance of the Troy-Bilt 440 is straightforward due to its accessible engine and components. Routine tasks such as oil changes, air filter replacements, and blade sharpening can be performed with minimal hassle, ensuring the mower stays in top condition for years to come.

In conclusion, the Troy-Bilt 440 combines power, efficiency, and user-friendly features into an impressive lawn mower. Its exceptional engineering, advanced technologies, and thoughtful design make it a valuable investment for anyone serious about lawn care. Whether for residential upkeep or professional landscaping, the Troy-Bilt 440 stands out as a reliable and high-performing mower that meets a variety of mowing needs.