5

Maintaining

Your Log

Splitter

WARNING

Excessive pressure when seating beads may cause tire/rim assembly to burst with force sufficient to cause serious injury. Refer to sidewall of tire for recommended pressure.

Set Screw

Side View-Coupler

.0600 .0100

Figure 5-3

1.Remove three nuts that secure the pump to the coupling shield. Two nuts are at the bottom corners and one is in the top center. See Figure 5-3.

2.Remove the pump.

3.Rotate the engine by slowly pulling starter handle until engine coupling half set screw is visible. Loosen set screw using allen wrench and slide coupling half off engine shaft.

4.Loosen set screw on pump coupling half and remove coupling half.

5.Slide new engine coupling half onto the engine shaft until the end of the shaft is flush with the inner portion of the coupling half. (There must be space between the end of the engine support bracket and coupling half). Tighten set screw.

6.Install pump coupling half and key on pump shaft. Rotate coupling half until set screw faces opening in shield. Do not tighten set screw.

7.Install nylon “spider” onto engine coupling half.

8.Align pump coupling half with nylon “spider” by rotat- ing engine using starter handle. Slide coupling half into place while guiding three mounting bolts through holes in pump support bracket.

9.Secure with nuts removed earlier.

10.Set.010” to.060” clearance/gap between the nylon “spider” and the engine coupling half by sliding a feeler gauge or matchbook cover between the nylon “spider” and the engine coupling half and moving pump coupling half as needed. Secure pump coupling half with set screw. See Figure 5-3.

NOTE: Make certain proper clearance/gap is obtained before tightening set screw.

Tires

See sidewall of tire for recommended pressure. Under any circumstances do not exceed manufacturer’s recom- mended psi. Maintain equal pressure on all tires.

WARNING: Excessive pressure when seating beads may cause tire/rim as- sembly to burst with force sufficient to cause serious injury. Refer to sidewall of tire for recommended pressure.

14

Page 13 Page 15
Page 14
Image 14
Troy-Bilt 570 manual Tires, Set Screw, Side View-Coupler 0600, Install nylon spider onto engine coupling half
Page 13 Page 15

570 specifications

The Troy-Bilt 570 is an exceptional cultivator designed for both amateur and professional gardeners, making tasks like tilling and cultivating soil easy and efficient. With its robust construction and innovative features, it caters to users looking for reliability and performance in their gardening tools.

One of the standout features of the Troy-Bilt 570 is its powerful engine. It typically comes equipped with a dependable 170cc OHV engine, providing ample power to tackle tough soil conditions. The engine is designed for easy starting, which eliminates the frustration often associated with garden equipment. The performance is consistent, even when working in hard or compacted soil, making it a go-to choice for users with demanding gardening needs.

The Troy-Bilt 570 utilizes a counter-rotating tilling technology, which helps in breaking up tough soil and mixing in organic material with greater efficiency. This feature is crucial for promoting healthy plant growth, as it allows for better aeration and nutrient distribution within the soil. With its 16-inch tilling width, the Troy-Bilt 570 can cover large areas in a shorter amount of time, making it ideal for larger gardens or landscaping projects.

Another impressive characteristic of the Troy-Bilt 570 is its adjustable tilling depth. Users can easily modify the depth to meet their specific gardening requirements, whether they are preparing the ground for planting, aerating, or simply mixing in compost. The depth ranges from shallow to deep, allowing for versatility in various gardening tasks.

Ease of use is further enhanced by the cultivator's comfortable, ergonomic grips, which minimize fatigue during extended use. The cultivator also features a lightweight design, making it easy to maneuver around the garden or landscape. Additionally, the Troy-Bilt 570 comes with a variety of attachments, allowing users to customize their gardening experience further, whether it be for weeding, planting, or breaking ground.

In terms of durability, the Troy-Bilt 570 is built with high-quality materials, ensuring it can withstand the rigors of outdoor use over the years. The cultivator is also relatively easy to maintain, with accessible components that simplify repairs and upkeep.

In conclusion, the Troy-Bilt 570 cultivator stands out for its power, versatility, and user-friendly design. Its innovative features and technologies make gardening more efficient and enjoyable, providing gardeners with the tools they need for successful cultivation and landscaping projects.
Top Page Image Contents