TILLING TIPS & TECHNIQUES (CON’T)

Power Composting

Power composting simply means tilling under and burying in the soil all manner of organic matter such as crop residues, leaves, grass clippings and cover crops. This material will de- compose during the non-growing season and add important natural nutrients to the soil.

The first place to begin is with crop residues such as leftover vines, stalks, stems and roots. Power compost these crop residues as soon as they finish bearing. The sooner this is done, the better, as tender green matter is easier to till under. Use the deepest depth regulator set- ting possible without causing the engine to labor or the tiller to jump ahead.

Standing cornstalks of reasonable height can be power composted. Pushing over (but not uprooting) cornstalks will often make it easier to chop up the stalks. Keep the tines clear of excessive tangling by “fishtailing” or frequently using reverse. Make several passes, then re- turn a few days later to finish off any remaining stubble.

After tilling under crop residues, add more organic matter such as leaves, grass clippings and even kitchen scraps. When tilled into the soil, this organic matter will decompose and add even more important nutrients to the soil.

WARNING: When power composting, do not keep the Depth Regulator Lever at a deep setting if the tiller jumps or bucks.

If jumping or bucking occurs, move the Depth Regulator Lever down to a shallow setting and then slowly increase the tilling depth on later passes.

Failure to follow this warning could result in personal injury.

After power composting, you may want to plant a “green manure” cover crop to protect the soil during the off-season. You simply grow a crop of clover, alfalfa, buckwheat, peas, beans, rye grass, grain, or kale and then till it into the soil prior to the planting season.

Tilling On Slopes

Read the following recommendations before tilling on slopes:

If you must garden on a moderate slope, please follow two very important guidelines:

1.Till only on moderate slopes, never on steep ground where footing is difficult (review safe- ty rules in Section 1: Safety of this manual).

2.We recommend tilling up and down slopes rather than terracing. Tilling vertically on a slope allows maximum planting area and also leaves room for cultivating.

IMPORTANT: When tilling on slopes, be sure the correct oil level is maintained in the engine (check every one-half hour of operation). The incline of the slope will cause the oil to slant away from its normal level and this can starve engine parts of required lubrication. Keep the motor oil level at the full point at all times!

Tilling Up and Down Slopes (Vertical Tilling)

WARNING: Do not

operate tiller on a slope too steep for safe operation. Till slowly and be sure you have good footing. Never permit tiller to freewheel down slopes. Failure to follow this warning could result in personal injury.

To keep soil erosion to a minimum, be sure to add enough organic matter to the soil so that it has good moisture-holding texture and try to avoid leaving footprints or wheel marks.

When tilling vertically, try to make the first pass uphill as the tiller digs more deeply going uphill than it does downhill. In soft soil or weeds, you may have to lift the handlebars slightly while going uphill. When going downhill, overlap the first pass by about one-half the width of the tiller.

Tilling Across Slopes Without Using Terraces (Horizontal Tilling)

If vertical or terracing gardening aren’t practical for you, then you can till laterally across a slope. We don’t recommend this method as it can create unsure footing and invites soil erosion.

As in terrace gardening, start at the top of the slope and overlap the first pass by half the width of the tiller. For added stability of the tiller, always keep the uphill wheel in the soft, newly tilled soil.

Terrace Gardening

When a slope is too steep or too short for vertical tilling, it may be necessary to till across the slope and create terraced rows. Terraces are rows that are cut into the side of a slope, creating a narrow, but flat area on which to plant.

On a long slope, you can make several terraces, one below the other.

Terraces should be only 2-to-3 feet wide. Digging too far into the side of the slope will expose poor subsoil that is unproductive for plants.

15

Page 15
Image 15
Troy-Bilt 634A, 630C, 634F manual Tilling Tips & Techniques CON’T, Power Composting, Tilling On Slopes

634F, 630C, 634A specifications

The Troy-Bilt line of tillers, specifically the 634A, 630C, and 634F models, represents a blend of reliability, power, and advanced engineering designed to meet the needs of avid gardeners and professional landscapers alike. Each model boasts unique features and technologies that enhance performance and usability.

The Troy-Bilt 634A is equipped with a 6.5 HP engine, providing ample power for tackling tough soil conditions. The tiller's 16-inch tilling width allows for efficient breaking up of soil, while its impressive tilling depth of up to 8 inches ensures that garden beds are adequately prepared for planting. The 634A model features a lightweight design, making it easy to maneuver around flower beds and garden rows. Additionally, the adjustable handlebar enhances comfort during operation, accommodating various user heights.

In contrast, the Troy-Bilt 630C offers a slightly different approach. This model is designed for those who seek enhanced control and precision while tilling. It features a 6.75 HP engine and similar tilling capabilities but adds an innovative counter-rotating tilling technology. This feature is particularly useful for breaking up compacted soil and mixing in organic materials, resulting in a well-aerated and fertile garden bed. The 630C also comes equipped with a variety of attachments, allowing users to expand its functionality for different gardening tasks.

The 634F model elevates the line further with its robust frame and advanced features. With a powerful 7 HP engine, it provides optimal performance for larger plots of land. The 634F is designed with a wider tilling width of 18 inches, making it perfect for larger gardens and landscaping projects. Its self-propelled system allows for effortless movement across various terrains, reducing user fatigue. Additionally, the 634F includes a unique automatic depth adjustment feature, enabling gardeners to achieve the desired tilling depth without constant manual adjustments.

Across all three models, Troy-Bilt's commitment to user-friendly design shines through. Features such as easy-to-access controls, durable construction, and stable wheels enhance overall usability. The patented "Forward and Reverse" operating system found in these tillers ensures that gardeners can navigate easily in tight spaces, making them versatile for any gardening situation. The combination of power, advanced technology, and user-focused design makes the Troy-Bilt 634A, 630C, and 634F top choices for those looking to cultivate their garden with ease and efficiency.