Ir!lv_vl._!:t_ll_[fll
q t b
I
Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Remove the key from the keyswitch on units so equipped.
Failure to follow these instructions can result in serious personal injury or property damage.
MAINTENANCESCHEDULE
PROCEDURE | NOTES | |
Check motor oil level | 2, | 3 |
Clean engine | 2, | 7 |
Check drive belt tension | 1, | 4 |
Checknutsandbolts | 1, | 4 |
Change motor oil | 1,4, | 6 |
Lubricate tiller | 4 |
|
Service foam | 7 |
|
(if so equipped) |
|
|
Service paper air filter (if so equipped) | 7 |
|
Check gear oil level in transmission | 1, | 5 |
Check tines for wear | 5 |
|
Check air pressure in tires | 5 |
|
Service spark plug | 7 |
|
NOTES
1 - After first 2 hours of
2- Before each use.
3- Every 5 operating hours.
4- Every 10 operating hours.
5- Every 30 operating hours.
6- More frequently in dusty or dirty conditions.
7- SeeEngine Owner's Manual for service recommendations.
8- Whichever time interval occurs first.
TILLERATTACHMENTS
The attachments listed below are availablefor your tille Contactyour authorized dealeror the factory for current information.
BUMPER-- MODEL0EM-290-254
The tubular steel bumper helpsto protect the enginefrom damage.
HILLER/FURROWER-- MODEL0EM-290-251
The furrower bladeattachesto the backof the depth regulator assemblyand is used to create rows, trenches and ditches upto 8" deep, depending on soil conditions. The two hiller wings attach to the sides of the furrower bladeand are used to makehilled rows and raised bedgardens.
ROWMARKER-- MODEL0EM-290-257
The row marker attachesto the hiller/furrower attachment and is used to scratch lines in the seedbedfor laying out furrows, trenches, raised beds,etc. (eliminates the needfor stakes, string and measuringtape). The row marker is adjustablein length from 28" to