Troy-Bilt manual 34Parts List, Model 665B, Drawing No

34Parts List

Model 665B

DRAWING NO. 8

NOTE 1: These screws are a special sealing screw that cannot be reused without risking the loss of transmission oil.

If these screws are loosened or removed, they must be replaced with new hardware.

REF	PART	DESCRIPTION	QTY.
No.	No.
1	GW-9621	Oil Seal–double lip, wheel shaft	2
2	1105620	Pipe Plug, 1/4	2
3	721-04001	Seal–Transmission bore	1
4	1186329	Screw–flanged hex hd., 5/16-18 x 3/4*	6
5	1983632	Oil Seal–input pinion shaft	1
6	GW-11513	Cover–Top of transmission (incl. four of
		Ref. No. 18 and two each of Ref. No.’s
		21 and 22)	1
7	GW-20694	Gasket–Transmission top cover	1
8	GW-20893	Transmission case, tube and rear housing
		assembly	1
9	GW-9467	Plug–gear oil fill hole	1
10	GW-20889	Plate–wheel drive cable mounting	1

REF	PART	DESCRIPTION	QTY.
No.	No.
11	GW-97073	Oil Seal–tiller shaft	2
12	1186328	Screw–flanged hex hd., 5/16-18 x 5/8*	2
13	GW-20873	Cover–tiller housing, left-side	1
14	GW-1129-1	Gasket–tiller housing cover, .010	A/R
15	GW-1915089	Screw Kit: includes three (3) 1/4-20 x 7/8
		self-sealing screws	A/R
16	GW-1115	Cap–Rear bearing	1
17	GW-1124-2	Gasket–Rear bearing cap, .010 thick	A/R
18	GW-90063	Screw–flanged hex hd., 5/16-18 x 1*	4
19	1915087	Screw Kit: includes five (5) 1/4-20 x 5/8
		self-sealing screws	A/R
21	736-0169	Lockwasher, 3/8	2
22	710-0216	Hex Hd. Screw, 3/8-16 x 3/4*	2

* Specify GRADE 5 if ordering part locally. A/R – As Required