3.When disconnecting the extension cord, always unplug the end at the three-prong wall outlet before unplugging the opposite end from the snow thrower.

4.Move throttle control to STOP position.

5.Remove the ignition key (Do not turn key) to prevent unauthorized use of equipment.

6.Wipe all snow and moisture from the area around the engine as well as the area in and around the drive control and auger control. Also, engage and release both controls several times.

NOTE: Keep the key in a safe place. The engine cannot start without the ignition key.

Recoil Starter

1.With engine running, pull starter rope with a rapid, continuous full arm stroke three or four times. Pulling the starter rope will produce a loud clattering sound, which is not harmful to engine.

2.Move throttle control to STOP position.

3.Remove the ignition key (Do not turn key) to prevent unauthorized use of equipment.

NOTE: Keep the key in a safe place. The engine cannot start without the ignition key.

4.Wipe all snow and moisture from the area around the engine as well as the area in and around the drive control and auger control. Also, engage and release both controls several times.

To Engage Drive

1.With the engine running near top speed, move shift lever to one of six FORWARD positions or two REVERSE positions. Select a speed appropriate for the snow conditions that exist.

2.Squeeze drive control against the right handle and the snow thrower will move. Release it and the drive motion will stop.

To Engage Augers

1.To engage augers and start snow throwing, squeeze the left hand auger control against the left handle. Release to stop augers.

2.While the auger control is engaged, squeeze the drive control to move, release to stop. Do not shift speeds while the drive is engaged.

NOTE: This same lever also locks auger control so you can turn the chute control without interrupting the snow throwing process.

3.Release the auger control; the interlock mechanism should keep the auger control engaged until the drive control is released.

4.Release the drive control to stop both the augers and the wheel drive. To stop the auger, both levers must be released.

Auger Control Test

Perform the following test before operating your snow thrower for the first time and at the start of each winter. Check the adjustment of the auger control as follows:

1.When the auger control is released and in the disengaged “up” position, the cable should have very little slack. It should NOT be tight.

2.In a well-ventilated area, start the snow thrower engine as instructed on the previous page. Make sure the throttle is set in the FAST position.

3.While standing in the operator’s position (behind the snow thrower), engage the auger.

4.Allow the auger to remain engaged for approximately ten (10) seconds before releasing the auger control. Repeat this several times.

5.With the throttle control in the FAST (rabbit) position and the auger control in the disengaged “up” position, walk to the front of the machine.

6.Confirm that the auger has completely stopped rotating and shows NO signs of motion. If the auger shows ANY signs of rotating, immediately return to the operator’s position and shut off the engine. Wait for ALL moving parts to stop before re-adjusting the auger control.

7.To readjust the control cable, loosen the upper hex nut on the auger cable bracket. See Figure 4-2.

8.Position the bracket upward to provide more slack (or downward to increase cable tension).

9.Retighten the upper hex nut.

10.Repeat Auger Control Test to verify proper adjustment has been achieved.

Figure 4-2

WARNING

The muffler, engine and surrounding areas become hot and can cause a burn 150°F (65°C). Do not touch.

When selecting a Drive Speed, use the slower speeds until you are comfortable and familiar with the operation of the snow thrower.

NEVER reposition the shift lever (change speeds or direction of travel) without first releasing the drive control and bringing the snow thrower

to a complete stop. Doing so will result in premature wear to the snow thrower’s drive system.

11

Page 10 Page 12
Page 11
Image 11
Troy-Bilt 769-03244 warranty To Engage Drive, To Engage Augers, Recoil Starter, Auger Control Test
Page 10 Page 12

769-03244 specifications

The Troy-Bilt 769-03244 is a versatile and powerful garden tiller designed for homeowners and gardening enthusiasts seeking to cultivate their outdoor spaces efficiently. This tiller stands out for its robust features, advanced technologies, and user-friendly characteristics, making it an ideal choice for both seasoned gardeners and those new to gardening.

One of the main features of the Troy-Bilt 769-03244 is its powerful 4-cycle engine, which provides sufficient torque and durability needed to break up tough soil and prepare it for planting. The engine’s design ensures lower emissions and quieter operation compared to conventional 2-cycle engines, making it a more environmentally friendly option. The rear-tine tiller design allows for better balance and control, ensuring that users can maneuver it effortlessly across various terrains.

Another significant characteristic is the tiller's adjustable tilling width. The Troy-Bilt 769-03244 comes with a tilling width of up to 16 inches, which can be adjusted depending on the size and needs of your garden. This feature enhances its versatility, allowing it to work well in tight spaces or larger plots of land. Moreover, the tiller offers a tilling depth of up to 8 inches, ensuring thorough soil preparation, which is crucial for healthy plant growth.

The Troy-Bilt 769-03244 also incorporates the company’s patented “Counter-Rotating Tines” technology. This feature allows the tines to spin in the opposite direction of the tiller’s forward motion, providing superior soil penetration and reducing the risk of the tiller bouncing or skipping across the ground. This innovation not only enhances tilling efficiency but also improves soil aeration, leading to healthier root systems for your plants.

Additional user-friendly characteristics include the adjustable handle, which can be modified to accommodate different heights for operator comfort and ease of control. The tiller’s lightweight design makes it easier to transport and store, adding to its practicality.

In summary, the Troy-Bilt 769-03244 is an excellent investment for anyone looking to cultivate their garden with ease and efficiency. Its powerful engine, adjustable tilling width and depth, counter-rotating tines technology, and user-centric design features work in harmony to create a tilling experience that is both effective and enjoyable. Whether you are preparing a new garden bed or maintaining an existing one, this tiller is equipped to meet your gardening needs with reliability and performance.
Top Page Image Contents