3

Setting Up

Your Snow

Thrower

 

Drift Cutters (If Equipped)

Alternator Lead

Drift cutters should be used when operating the snow

 

thrower in heavy drift conditions.

Alternator

• On models so equipped, drift cutters and hardware

Lead

are assembled to the auger housing inverted.

 

• Remove the carriage bolts and wingnuts securing the

Lamp Wire

drift cutters to the housing.

• Reposition drift cutters so they face forward as shown

NOTE: Wheels are omitted from illustration for clarity.

in Figure 9. Secure with hardware previously removed,

 

 

wingnuts should be fastened on the outside of the

Figure 8

housing as shown.

 

If your unit is not equipped with drift cutters, you may

 

contact Customer Support as instructed on page 2 for

 

information regarding price and availability.

Snowthrower Model

Drift Cutter Kit:

All models

OEM-390-679

WARNING

Never use your hands to clean snow and ice from the chute assembly or auger housing.

IMPORTANT

Under any circum- stance do not exceed manufacturer’s recom- mended psi. Equal tire pressure should be maintained at all times. Excessive pressure when seating beads may cause tire/rim

Figure 9

Clean-Out

Tool

Clean-Out Tool

The clean-out tool is mounted to the rear of the auger housing and is designed to clear a clogged chute. See Figure 10. Refer to the Operation section for more detailed information regarding the chute clean-out tool.

NOTE: This item is fastened with a cable tie to the rear of the auger housing at the factory. Cut the cable tie before operating the snow thrower.

WARNING: Never use your hands to clean snow and ice from the chute assembly or auger housing.

Final Adjustments

Make these final adjustments before operating your snow thrower for the first time. Failure to follow these instruc- tions may cause damage to the snow thrower.

Wheel Drive Control & Shift Lever

Perform the following test to determine need for adjust- ment:

•Move the shift lever into sixth (6) position. See Figure 14.

•With the drive control released (see Figure 11A), push the snow thrower forward, then pull it back. The machine should move freely.

assembly to burst with force sufficient to cause serious injury. Refer to sidewall of tire for recommended pressure.

Figure 10

• Engage the drive control and attempt to move the

 

machine both forward and back, resistance should be

 

felt.

 

• Move the shift lever into the fast reverse (R2) position

 

and repeat the previous two steps.

 

If you experienced resistance rolling the unit, either

 

when repositioning the shift lever from 6 to R2 or when

 

attempting to move the machine with the drive control

 

released, adjust the drive control immediately. To adjust,

 

proceed as follows:



Page 7 Page 9
Page 8
Image 8
Troy-Bilt 769-03253 warranty Drift Cutters If Equipped, Clean-Out Tool, Final Adjustments
Page 7 Page 9

769-03253 specifications

The Troy-Bilt 769-03253 is a standout model in the world of outdoor power equipment, specifically tailored for those looking for a robust and efficient gardening solution. This product, often recognized for its reliability and user-friendly design, is ideal for homeowners seeking to maintain their yards with minimal effort.

One of the most notable features of the Troy-Bilt 769-03253 is its powerful 270cc engine, which provides ample power for various yard tasks. This engine delivers strong performance, making it capable of handling tougher jobs like tilling hard, compacted soil or breaking new ground. The engine is designed for easy starting, thanks to its innovative recoil start system, making it accessible to users of all skill levels.

The tilling width of the Troy-Bilt 769-03253 is impressive at 18 inches, allowing users to cover a larger area in less time. This feature is particularly beneficial for larger gardens or landscaping projects. Additionally, the tiller is equipped with a depth adjuster, enabling precise control over how deep you can till into the soil, which is essential for different planting requirements.

Another key attribute of this tiller is its counter-rotating tines. This technology allows for better soil mixing and improved aeration, promoting healthier soil and more robust plant growth. The tines are made from durable materials, ensuring longevity even when used in tougher ground conditions. They are also designed for easy replacement, which adds to the overall convenience.

Ergonomics play a significant role in the design of the Troy-Bilt 769-03253, featuring adjustable handles that accommodate users of various heights. This ensures comfort during extended use, reducing fatigue and enhancing overall productivity. Furthermore, the tiller is designed for optimal stability, with a balanced build that prevents it from tipping during operation.

The Troy-Bilt 769-03253 also incorporates safety features such as an automatic clutch that ensures the tiller comes to a stop when not in use, helping to prevent accidents. With its combination of power, durability, and ease of use, the Troy-Bilt 769-03253 is a top choice for anyone looking to enhance their gardening and landscaping projects, making it a valuable addition to any homeowner's outdoor toolkit.
Top Page Image Contents