SECTION 2: ASSEMBLING YOUR SNOW THROWER

Loose Parts

The augers are secured to the auger shaft with two shear pins and bow tie cotter pins. If you hit a foreign object or ice jam, the snow thrower is designed so that the pins may shear. Two replacement shear pins and cotter pins are provided for your convenience. Store in a safe place until needed. See Figure 1.

Bow Tie

Cotter Pins

Shear Pins

Figure 1

IMPORTANT: NEVER replace the auger shear pins with standard hex pins. Any damage to the auger gearbox or other components from using standard pins will not be covered by your snow thrower’s warranty.

Items Required For Assembly

1.Pair of pliers

2.Engine oil

3.Fresh gasoline

Before Assembly

•Disconnect spark plug wire and ground it against the engine to prevent unintended starting.

NOTE: Reference to the right hand or left hand side of machine are observed from the operating position.

Assembling Handle

For shipping purposes, the upper handle is secured loosely to the lower handle with four wing nuts.

•Remove the lower plastic wing nut, cupped washer and carriage bolt from each side of the lower handle. See Figure 2.

•Raise the upper handle assembly until it locks over the lower handle.

•Look at the lower rear of the snow thrower frame to be sure all the cables are aligned with the cable roller guides. Make sure the spring (found at the end of each cable) is attached to its actuator bracket.

•Secure the upper handle and lower handle with the two plastic wing nuts, cupped washers and carriage bolts previously removed. See Figure 2.

•Tighten the two wing nuts already in place on the upper holes and secure the handles firmly.

•Slide the shift rod connector down over the end of the lower shift rod. Tap the connector until it locks over the lower shift rod. See Figure 2.

NOTE: If the connector is not properly assembled, the shift rod will pivot and you will not be able to change speeds or direction of movement.

 

 

Upper

Carriage

 

Chute

 

Rod

Bolt

 

 

 

Cupped

 

 

Washer

 

 

 

Wing

Upper

 

Chute Crank

 

Nut

 

Bracket

 

 

 

 

Hairpin Clip

 

 

Carriage Bolt

 

 

Lower Chute Crank

Figure 2

Attaching Chute Directional Control

•Remove the hairpin clip from the upper chute rod and slide the upper chute rod through the upper chute rod bracket and into the lower chute rod. A pair of pliers may help in this job.

•Align the two holes on both chute rods and insert the hairpin clip removed earlier, through these holes. See Figure 2.

•With the flange locknuts loosened on the lower chute crank bracket (see Figure 3) adjust the bracket so that the spiral on the chute crank fully engages the teeth on the chute assembly. Tighten the nuts on the lower chute crank bracket securely.

Chute Directional

Control

Chute

Assembly

Lower Chute

Crank

Bracket

Flange Locknuts

Figure 3

5

Page 4 Page 6
Page 5
Image 5
Troy-Bilt 772C0767 manual Assembling Your Snow Thrower
Page 4 Page 6

772C0767 specifications

The Troy-Bilt 772C0767 is a versatile and powerful string trimmer designed for homeowners and landscaping professionals who need an efficient tool for maintaining gardens, yards, and outdoor spaces. One of the standout features of this trimmer is its reliable engine, which delivers impressive performance and a consistent cutting power, making it ideal for tackling tough grass and weeds.

Equipped with a 159cc auto choke engine, the Troy-Bilt 772C0767 offers ease of starting and smooth operation, reducing the time you spend preparing to work. The innovative Easy Start technology is designed to minimize the effort required to start the trimmer, allowing users to quickly get to work without the frustrations often associated with traditional starting methods.

The trimmer boasts a 17-inch cutting width, enabling expansive coverage and efficiency as you navigate through larger areas. This cutting width makes it suitable for working around flower beds, fences, and other obstacles while providing a clean and precise cut. Furthermore, the dual-line bump head allows for quick line advancement, ensuring that you can keep cutting without frequent interruptions.

A significant aspect of the Troy-Bilt 772C0767 is its lightweight and ergonomically designed frame. Weighing in at just under 11 pounds, this trimmer is easy to maneuver and reduces user fatigue during longer tasks. The comfortable handle grip enhances control, while the adjustable shaft accommodates users of different heights, making it suitable for a wide range of individuals.

In addition to its physical features, the Troy-Bilt 772C0767 incorporates advanced technologies such as the Turbo-Spin feature. This unique design allows for better airflow around the trimmer line, improving cutting efficiency and ensuring optimal performance in various mowing conditions.

Durability is also a key characteristic of the Troy-Bilt 772C0767. Built with high-quality materials, this trimmer is designed to withstand regular use in tough outdoor environments. The solid construction ensures reliability, allowing you to invest in a tool that will serve you well over time.

Overall, the Troy-Bilt 772C0767 string trimmer combines power, efficiency, and user-friendly features to create an essential tool for anyone looking to maintain their yard or garden. With its combination of innovative technologies and quality construction, this trimmer is a smart choice for all your trimming needs.
Top Page Image Contents