Handle | Hopper |
| |
Chipper Chute |
|
| Spring Latch |
Starter Handle |
|
| Discharge Chute |
| Wing Knob |
Two Bar | Lock Rod |
(Model CS4210 Only) |
|
Figure 4
SECTION 4: OPERATING YOUR CHIPPER SHREDDER
WARNING: The operation of any chipper shredder can result in foreign objects being thrown. Always wear the safety glasses provided with this unit or eye shields before chipping or shredding and while performing any adjustments or repairs.
Gas And Oil Fill-Up
Service the engine with gasoline and oil as instructed in the separate engine manual packed with your chipper shredder. Read instructions carefully.
WARNING: Never fill fuel tank indoors with engine running or until the engine has been allowed to cool for at least two minutes after running.
Starting Engine
•Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug is fastened securely over the metal tip on the spark plug.
• Open fuel |
| |
(Model CS4210). |
| |
• Move choke control lever to |
| |
CHOKE position (Models | OPEN | |
CS4210 & CS4265) . | ||
|
NOTE: (A warm engine may not require choking).
•Move throttle control lever to FAST (rabbit) position (Model CS4265).
7
