WARNING: Use caution when replacing the blades. Wear heavy gloves to avoid injury while handling the weld bolts, housing or the blades.

•When sharpening blades, follow the original angle of grind. Also, make sure to remove an equal amount from each blade and torque hardware to 250 - 300 in.lb.

NOTE: Make sure that blades are reassembled with the sharp edge facing upward.

Replacing the Belt

NOTE: Because the engine on this equipment has a tapered crankshaft, a special impeller removal tool (part number 753-0900) is required to remove the impeller assembly. Contact your local service dealer for this.

•Disconnect the spark plug wire and ground it away from the spark plug.

•Drain the gasoline and oil from the chipper shredder vacuum.

•Remove the three wing nuts that secure the nozzle to the outer housing and remove the nozzle. Refer to Figure 2.

•Remove the vacuum bag from the unit.

•Remove the discharge chute as instructed in “Cleaning The Flail Screen.”

•Remove the plastic belt cover from front of the engine by removing two self-tapping screws. Refer to Figure 13.

•Tip the unit backward so that it rests on the handles.

•Remove the lower belt guard by removing the two self-tapping screws. See Figure 14.

•Remove the safety switch from front of the outer housing by removing the two self-tapping screws. See Figure 14.

Safety

Switch

Self-Tapping

Screw

Lower

Belt Guard

Self-Tapping

Screws

Figure 14

•Remove the two hex bolts and hex lock nuts which extend through the housing. Lift the flail screen out of the housing. Refer to Figure 11.

•Remove the outer housing and housing blades by removing the fourteen self-tapping screws.

•Remove the hex bolt, lock washer, and flat washer that secures the impeller assembly to the crankshaft. See Figure 15.

Hex Bolt

Impeller

Lock Washer

Assembly

Flat Washer

 

Inner

 

Housing

 

 

Housing

 

Blades

Figure 15

•Thread the special impeller tool into the crankshaft. Stop when the impeller assembly can move on the crankshaft.

•If the old belt is still on the unit, cut belt to remove from unit.

•Remove impeller assembly from the crankshaft and unthread the impeller tool from the impeller.

Hex Bolts

Hex Bolts

Figure 16

•Remove the inner housing and mounting adapter by removing the five hex bolts and two hex nuts. See Figure 16.

•Insert new belt between the frame and the transmission pulley. See Figure 17. (You may have to slightly pry the frame away from the pulley with a screwdriver for this.)

11

Page 10 Page 12
Page 11
Image 11
Troy-Bilt CSV206 manual Replacing the Belt, Self-Tapping, Screws
Page 10 Page 12

CSV206 specifications

The Troy-Bilt CSV206 is a powerful and versatile chipper shredder that excels in both performance and ease of use, making it an ideal choice for homeowners looking to manage yard waste efficiently. With its robust construction and innovative technologies, this machine ensures effective shredding and chipping of garden debris, such as branches, leaves, and twigs.

At the heart of the CSV206 is its reliable 206cc OHV engine, designed to deliver ample power for tackling heavy-duty tasks. The engine features a recoil start for quick and easy ignition, allowing users to jump straight into their yard clean-up without the hassle of complicated starting procedures. Coupled with a 78-pound weight, this chipper shredder strikes a good balance between portability and stability, allowing it to handle challenging terrains while maintaining its sturdiness.

The CSV206 showcases a unique 2-in-1 design, featuring a chipper and a shredder in one machine. Its 1.5-inch max chip capacity is ideal for tackling branches and larger-sized debris, making it perfect for maintaining a clean yard. The integrated shredding system efficiently reduces leaves and smaller materials into mulch, which can then be conveniently composted or used to enhance garden beds.

One noteworthy feature of the CSV206 is its large, versatile hopper. The top-loading design enables users to easily feed materials into the machine, which is complemented by a side discharge chute that directs shredded material precisely where it’s needed. This design reduces the effort and time needed for yard clean-up, making it a preferred choice among gardeners and landscapers.

User-friendly technology is evident in the CSV206's safety features, including a safety lid that ensures the chipper operates only when properly closed. Additionally, its durable steel construction ensures long-lasting performance, and the powder-coated finish helps resist rust and corrosion, extending the lifespan of the machine.

The Troy-Bilt CSV206 is also equipped with oversized wheels that enhance mobility, allowing users to navigate their yard smoothly, even across uneven terrain. With its blend of power, versatility, and user-friendly design, the Troy-Bilt CSV206 stands out as a great investment for anyone needing an efficient solution for yard waste management. Whether tackling seasonal clean-ups or maintaining regular yard maintenance, this chipper shredder promises to simplify the task and deliver impressive results.
Top Page Image Contents