Starting the Engine

WARNING: Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

NOTE: Refer to the TRACTOR SET-UPon page 8 of this manual for Gasoline and Oil fill-up instructions.

•Insert the tractor key into the ignition switch module.

•Place the PTO (Blade Engage) knob in the disengaged (OFF) position.

•Engage the tractor’s parking brake.

•Activate the choke control.

•Turn the ignition key clockwise to the START position. After the engine starts, release the key. It will return to the NORMAL MOWING position.

IMPORTANT: Do NOT hold the key in the START position for longer than ten seconds at a time. Doing so may cause damage to your engine’s electric starter.

•After the engine starts, deactivate the choke control.

NOTE: Do NOT leave the choke control on while operating the tractor. Doing so will result in a "rich" fuel mixture and cause the engine to run poorly.

Stopping the Engine

WARNING: If you strike a foreign object, stop the engine, disconnect the spark plug wire(s) and ground against the engine. Thoroughly inspect the machine for any damage. Repair the damage before restarting and operating

•If the blades are engaged, place the PTO/Blade Engage knob in the disengaged (OFF) position.

•Place the throttle control near the FAST position

•Turn the ignition key counterclockwise to the STOP position.

•Remove the key from the ignition switch to prevent unintended starting.

Engaging the Parking Brake

To engage the parking brake:

•Fully depress the brake pedal and hold it there while gently pushing the parking brake lever downward.

•Hold the parking brake lever down while removing your foot from the brake pedal.

•Once engaged, the parking brake lever and the

brake pedal will lock in the “down” position. To disengage the parking brake:

•Slightly depress the brake pedal.

NOTE: The parking brake must be engaged if the operator leaves the seat with the engine running or the engine will automatically shut off.

Driving The Tractor

WARNING: Avoid sudden starts, ex- cessive speed and sudden stops.

WARNING: Do not leave the seat of the tractor without first placing the PTO/Blade Engage knob in the disengaged (OFF) position, depressing the brake pedal and engaging the parking brake. If leaving the tractor unattended, also turn the ignition key off and remove the key.

•Briefly depress the brake pedal to release the parking brake. Move the throttle lever into the FAST (rabbit) position.

•To travel FORWARD, slowly depress the upper portion of the drive pedal forward until the desired speed is achieved. See Figure 6.

Brake Pedal

Figure 6

14

Page 13 Page 15
Page 14
Image 14
Troy-Bilt GT54 manual Starting the Engine, Stopping the Engine, Engaging the Parking Brake, Driving The Tractor
Page 13 Page 15

GT54 specifications

The Troy-Bilt GT54 is a versatile lawn tractor designed to provide homeowners with a powerful and efficient means of maintaining their gardens and lawns. With an emphasis on comfort, durability, and advanced technology, the GT54 stands out in the competitive market of riding lawn mowers.

Starting with its robust engine, the GT54 is equipped with a reliable 54-inch deck powered by a high-performance engine, often a 24 HP Kohler V-Twin. This engine not only offers considerable power but also ensures smooth operation and durability, making it suitable for a variety of terrains and cutting conditions. With the capability to tackle tough weeds and thick grass, the GT54 is perfect for medium to large yards.

One of the most significant features of the GT54 is its innovative cutting system. The tractor boasts a cutting deck that allows for 5 different height adjustments, making it easy to achieve the desired grass length. The twin-blade system combined with the deck's airflow design ensures that grass clippings are efficiently dispersed, providing a clean, even cut that can enhance the health of your lawn.

Comfort is a priority with the GT54, featuring an ergonomic seat designed for extended use, which reduces fatigue during longer mowing sessions. The steering wheel is positioned for easy maneuverability, allowing users to navigate tight corners and obstacles effortlessly.

The GT54 is also equipped with various technological advancements, including a fast and responsive automatic transmission that allows for easy speed adjustments. This feature gives homeowners greater control when mowing, particularly in challenging areas. Additionally, the electric PTO (Power Take-Off) makes engaging the mower deck straightforward, simplifying the mowing process even further.

For those looking to extend the functionality of their lawn tractor, the GT54 is compatible with various attachments, such as baggers, plows, and spreaders, making it a year-round tool for landscape maintenance. Its durable steel construction ensures longevity, making the GT54 a reliable investment for landscape enthusiasts.

In summary, the Troy-Bilt GT54 combines power, versatility, and user-friendly features. With its efficient cutting system, commitment to comfort, and advanced technological elements, this lawn tractor is designed to meet the needs of homeowners seeking to maintain their outdoor spaces with ease and precision. Whether one is a casual user or a dedicated landscaper, the GT54 is equipped to handle various chores efficiently.
Top Page Image Contents