Setting the Gauge Wheels and Roller

Gauge Wheels

Select the height position of the cutting deck by placing the deck lift lever in any of the six different cutting height notches on the right fender.

Adjust the deck wheels so that they are between ¼-inch and ½-inch above the ground as follows.

Place the tractor on a firm and level surface, preferably pavement, refer to Figure 2, and proceed as follows:

•Place the tractor’s deck lift handle in the normally desired mowing height setting, then check the gauge wheels for contact or excessive clearance with the surface below.

•If the wheels contact the surface adjust as follows:

a.Raise the deck lift handle to its highest setting.

b.Remove the lock nuts and shoulder screws which secure the front gauge wheels to the deck.

c.Place the deck lift handle in the desired mowing height setting.

d.Insert the shoulder screw with the gauge wheel into the index hole that leaves approximately 1/2" between the bottom of the wheel and the pavement.

e.Note the position of the index hole used; then install the other gauge wheel into the corresponding index hole of the other gauge wheel brackets.

•If the gauge wheels have excessive clearance with the surface below, lower the wheels to the index hole that provides the approximate 1/2 inch clearance as described above.

Lock Nut

 

Shoulder Screw

 

Cotter Pin

Clevis Pin

 

Figure 2

Roller

To adjust the height of the rollers found on the rear of the mowing deck upward or downward, proceed as follows:

•Place the deck lift lever in the lowest position.

•Remove the clevis pins and hairpin clips from the deck roller brackets on the left and right sides of the cutting deck. See Figure 2.

•Position the deck roller brackets up or down through the slots on the rear of the deck until desired position is reached, then re-attach with the clevis pins and hairpin clips just removed.

IMPORTANT: Be certain that the left roller bracket and the right roller bracket are set in the same position.

Refer to Leveling the Deck on page 17 of this manual for more detailed instructions regarding various deck adjustments.

9

Page 8 Page 10
Page 9
Image 9
Troy-Bilt GT54 manual Setting the Gauge Wheels and Roller
Page 8 Page 10

GT54 specifications

The Troy-Bilt GT54 is a versatile lawn tractor designed to provide homeowners with a powerful and efficient means of maintaining their gardens and lawns. With an emphasis on comfort, durability, and advanced technology, the GT54 stands out in the competitive market of riding lawn mowers.

Starting with its robust engine, the GT54 is equipped with a reliable 54-inch deck powered by a high-performance engine, often a 24 HP Kohler V-Twin. This engine not only offers considerable power but also ensures smooth operation and durability, making it suitable for a variety of terrains and cutting conditions. With the capability to tackle tough weeds and thick grass, the GT54 is perfect for medium to large yards.

One of the most significant features of the GT54 is its innovative cutting system. The tractor boasts a cutting deck that allows for 5 different height adjustments, making it easy to achieve the desired grass length. The twin-blade system combined with the deck's airflow design ensures that grass clippings are efficiently dispersed, providing a clean, even cut that can enhance the health of your lawn.

Comfort is a priority with the GT54, featuring an ergonomic seat designed for extended use, which reduces fatigue during longer mowing sessions. The steering wheel is positioned for easy maneuverability, allowing users to navigate tight corners and obstacles effortlessly.

The GT54 is also equipped with various technological advancements, including a fast and responsive automatic transmission that allows for easy speed adjustments. This feature gives homeowners greater control when mowing, particularly in challenging areas. Additionally, the electric PTO (Power Take-Off) makes engaging the mower deck straightforward, simplifying the mowing process even further.

For those looking to extend the functionality of their lawn tractor, the GT54 is compatible with various attachments, such as baggers, plows, and spreaders, making it a year-round tool for landscape maintenance. Its durable steel construction ensures longevity, making the GT54 a reliable investment for landscape enthusiasts.

In summary, the Troy-Bilt GT54 combines power, versatility, and user-friendly features. With its efficient cutting system, commitment to comfort, and advanced technological elements, this lawn tractor is designed to meet the needs of homeowners seeking to maintain their outdoor spaces with ease and precision. Whether one is a casual user or a dedicated landscaper, the GT54 is equipped to handle various chores efficiently.
Top Page Image Contents