Troy-Bilt TB180b BLOWER ASSEMBLY, Assembling Blower

BLOWER ASSEMBLYAssembling Blower

WARNING: To Reduce The Risk of Personal Injury or Electric Shock – Disconnect from power source before assembling or changing at- tachments.

Follow the steps below to assemble the blower.

1.Slide the blower tube competely onto outlet on front of blower housing with the curved end of the blower tube facing up. (See Figure 1)

2.Fasten with the two mounting screws. (See Figure 2)

FPO

Figure 1 - Sliding blower tube into place

ENGLISH

Figure 2- Fasten with mounting screws.

7