ADJUSTMENT INSTRUCTIONS
OPERATION OF THE WIRE GUARD
Rotate the wire guard as shown in Fig.12. The wire guard helps you keep the trimmer line away from fences, curbs, flowers etc.
Fig. 12
BEFORE STARTING THE UNIT
1.Make sure trimmer line is at full length. (Both lines reach out to the cutting blade on the guard. Remove protective material from cutting blade before use. )
2.To lengthen, press and release manual line feed button (E) while gently pulling two lines until the lines reach the line cutting blade. (Fig. 13).
Fig. 13
3.If line fails to feed when unit is stopped and restarted, repeat #2 (Fig. 13).
4.Use the correct extension cord as per the instructions in Section
5.Make sure the length of grass trimmer and position of assist handle are set for users comfort, adjust the length of grass trimmer by pressing the shaft adjustment
button, adjust the height of assist handle by loosening the adjustment knob.
6.The head will automatically dispense more line as unit is stopped and started.
7.To switch off the string trimmer, release the switch.
These operations should be repeated a few times before starting work to make sure that everything is functioning properly and to familiarize yourself with the grass trimmer. Start off slowly, when you have gained experience, you will be able to use the grass trimmer to its full potential.
13