OPERATING INSTRUCTIONS

WARNING: To avoid serious personal injury, do not insert hands into nozzles when removing or installing them.

INTERCHANGING NOZZLES

Use the following instructions to attach or interchange the two nozzles (Figs. 4 and 5).

Flare Nozzle

Indexing Button

on inside of

nozzle

Fig. 4

Concentrator Nozzle

Indexing Button

on inside of

nozzle

Fig. 5

WARNING: The nozzles may become worn and get sharp edges due to rubbing on the ground. It is suggested to use gloves when changing nozzles.

WARNING: To reduce the risk of injury, disconnect power source before removing nozzles.

INSTALLING FLARE OR CONCENTRATOR NOZZLE ONTO BLOWER HOUSING

1.Align the indexing button on the inside of the nozzle with the detent on the housing (Fig. 6).

2.Push the nozzle onto the housing and turn the nozzle clockwise until it locks (Fig. 7).

NOTE: Make sure the nozzles are installed properly, with indexing button facing up, before operating the unit.

Detent

Indexing Button

Fig. 6

Indexing Button Fig. 7

8