Symptom | Probable Cause | Corrective Action | Recommended Tools |
TREADBELT
STOPS
DURING
WORKOUT
Error Code
displays:
Go to page 3 & Page 4.
Loose safety key connection
Belt movement issue
Worn Deck / Belt
Occurs when making changes to speed or elevation
Overloaded house circuit
Continuity, connection to motor
Tread belt not centered or obstructed
•Check safety key to ensure that it is seating properly.
•Check connection sensitivity.
•If treadmill will not reset with cycling the power go to NO BELT MOVEMENT (pages 5 & 6)
•Perform Belt / Deck Wear Test
(page 24).
•Perform Amp Draw Test (page 20).
•Apply silicone.
•Replace Deck and Belt.
•May be related to electro static discharge. Contact Technical support for assistance.
•Verify the treadmill is on a dedicated circuit with at least a 15 amp breaker
•Have customer supply a dedicated circuit
•Reconnect or replace motor wires or connectors
•Tension tread belt (page 22)
•Center tread belt
•Remove obstruction
Liquid silicone single use pack
Liquid silicone
Applicator
Socket set
Note:
All trouble shooting should be performed in calibration mode.
Page 16
Support Services | Fax: | |
|
|
|
Page 7
