2
GB
INFORMATION AND WARNINGS
PLEASE READ THIS OWNER’S MANUAL THROUGH CAREFULLY BEFORE ASSEMBLING, USING
AND SERVICING THE ROWING MACHINE! FOLLOW THE INSTRUCTIONS DESCRIBED IN THIS
MANUAL CAREFULLY.
THE EQUIPMENT HAS BEEN DESIGNED FOR HOME USE. THE TUNTURI WARRANTY APPLIES ONLY FOR
FAULTS AND MALFUNCTIONS IN HOME USE.
NOTE ABOUT YOUR HEALTH
* Before you start any training, consult a physician to check your state of health.
* If you experience nausea, dizziness or other abnormal symptoms while exercising, stop your workout at once and
consult a physician.
* To avoid muscular pain and strain, begin each workout by warming up and end it by cooling down. Don’t forget to
stretch at the end of the workout.
NOTE ABOUT THE EXERCISING ENVIRONMENT
* Place the rowing machine on a firm, level surface.
* Make sure that the exercising environment has adequate ventilation. To avoid catching cold, do not exercise in a
draughty place.
NOTE ABOUT USING THE EQUIPMENT
* Parents or others responsible for children should note that children’s natural playfulness and curiosity may lead to
situations and behaviour for which the rowing machine is not designed. If children are allowed to use the device, they
should be supervised and taught to use the rowing machine properly, keeping in mind the child’s physical and mental
development and their personality. The rowing machine is not a toy.
* Before you start using the rowing machine, make sure that it functions correctly in every way. Do not use a faulty
device.
* In heavy or long-term use, the machine may shed dust or oil. It is therefore advised to place the machine on a
protective base.
* Only one person may use the cycle at a time.
* Wear appropriate clothing and shoes when exercising.
* Do not attempt any servicing or adjustment other than those described in this manual. The given service instructions
must be followed carefully.
* The equipment is not recommended for persons weighing over 110 kg.
ASSEMBLY
Before assembling the device, make sure the following
parts are present:
1. frame
2. rail
3. seat
Hardware kit including the following:
screwdriver, allen key wrench, fastening screws and
sleeves for the rail (4 pcs), fastening screws for the seat
(4 pcs), batteries (2 pcs)
If you notice that a part is missing, contact the dealer and
give the model (R 605), serial number and spare part
number from the spare part list at the back of the manual. INSERTING BATTERIES
Remove the meter from the frame between the footrests.
N.B. Be careful not to damage the wire. Insert two 1,5
V batteries by opening the bottom of the meter cover.
Note the - and + signs marked in the case. Replace the
cover and fasten the meter to the frame.
Remove the parts of the machine from the package and
assemble as follows: