Quick Start Guide
TCS series
Flying system components have been individually tested in accordance with the following regulations:
•The Health and Safety at Work Act 1974
•The Supply of Machinery (Safety) Regulations 1992
•The Lifting Operations and Lifting Equipment Regulations 1998
General Description
To take full advantage of the extremely flexible properties of the TCS series loudspeaker, the rigging system is designed to be intuitive, inherently safe, flexible, and simple to use. The load is taken entirely through the steel flygear and not through the cabinet’s woodwork.
Rigging Parts
The rigging system consists of external steel flyplates fitted into rebates on the short sides of the loudspeaker enclosure forming the pivot point about which cabinets can be angled, working together with flyplates fitted towards the rear of the cabinet which mate with the flyplates of the cabinet above, providing a range of
A kit of parts is supplied with each
8 x M6 x 35mm csk hex head screws
2 x front flyplate
2 x rear flyplate (handed left and right)
4 x M6 x 45mm high tensile socket head screws 4 x M6 split washers
1 x 4mm Allen key
1 x 5mm Allen key
The rigging system includes all the necessary hardware to support a column of up to 5 cabinets (using the
The rigging design allows the creation of arrays that can be assembled quickly and with full control of the vertical angles between enclosures and the array’s vertical inclination. A range of
TCS series Quickstart Guide v1.0 - Page - 4
