Turbosound TCS-B15B(DP), TCS-1561/74(DP), TCS-122/XX(DP), TCS-B15A(DP) Mounting and Fixing

Quick Start Guide

TCS series

Mounting and Fixing

TCS series cabinets are designed with multiple internal rigging points to suit many possible mounting methods in permanent installations. All cabinets can be simply suspended using optional M8 or M10 shoulder eyebolts coupled to the internal rigging points provided. Remove the appropriate countersunk screws and replace them with eyebolts, which must have a thread length of at least 18mm. Use the rear rigging point to angle the cabinet for optimum room coverage. Cabinets may be hung upside down if required. Turbosound WB-20, WB-55 and CB-55 wall and ceiling brackets are optionally available for TCS series cabinets, and these are also compatible with OmniMount™ wall and ceiling brackets which use 60mm x 60mm hole spacing. Some examples of rigging options are shown below.

Model	Wall	Ceiling	Downfill	Vertical		Horizontal	Eyebolts
				Array		Array
TCS-61	WB-20	CB-55	SB-61				EB-8
			ICC-61
TCS-122	WB-55	CB-55		ICC-2V		FP-1	EB-10/40
						ICC-2H
TCS-152	WB-55	CB-55		ICC-2V		FP-1	EB-10/40
						ICC-2H
TCS-1561				ICC-2V			EB-10/40
TCS-B15A					FP-2		EB-10/40
						ICC-4H
TCS-B15B					FP-2		EB-10/40
						ICC-4H
TCS-B218							EB-10/40

TCS Quickstart Guide - Page - 4