Turbosound user manual TCS Compact series, TCS-C50Tmanual page, + + Speaker

user manual

TCS Compact series

4.Connect the wiring to the removable connector. A 4-way connector is supplied with the loudspeaker. Strip the insulation back by 5mm (3/16”), insert the bare ends of the wire into the connector (do not tin the wire) and screw down the hold-down screw with a small flat blade screwdriver.

There are two possible connection strategies, depending on the desired circuit result when a single unit is disconnected for trouble shooting or servicing:

ƒParallel Input Terminals. This allows the circuit to remain intact whenever a speaker is disconnected. Connect the outgoing pair of wires to the same terminals as the incoming pair of wires.

Inp Link

- + + -

+ -

Power Amplifier

Input Link

- + + -

Speaker 1

Input	Link	Input	Link
- +	+ -	- +	+ -
Speaker 2		Speaker 3

ƒLoop-through Terminals. All loudspeakers after this unit will be disconnected, helping to isolate problems to a section of the distributed line while leaving the wires connected to the connector.

Inp Link

- + + -

Power Amplifier

+ -

Input Link

- + + -

Speaker 1

Input	Link	Input	Link
- +	+ -	- +	+ -
Speaker 2		Speaker 3

TCS-C50T manual page 10