C1 Enhanced Mode (Available depending on CPU)
This feature is used to enable the C1 Enhanced mode.
Enabled / Disabled
Execute Disable Bit
This feature is used to set the Execute Bit function.
Enabled / Disabled
Set Max Ext CPUID=3
This feature is used to set Max CPUID extended function value to 3. Disabled / Enabled
Discrete MTRR Allocation
This feature is used to configure the MTRR method. Disabling the feature will set the MTRR method in continuous status.
Disabled / Enabled
Processor Power Management
This feature is used to select the processor power management desired. Disable: C states and GV1/GV3 are disable
GV1/GV3 only: C states are disable Disabled / GV1/GV3 only
VRH Overheat Protection
This feature is used to enable/disable the VRM Overheat Protection. Enabled / Disabled
3.3.3 I/O Device Configuration
This setting allows you to configure I/O devices.
|
| PhoenixBIOS Setup Utility |
|
| ||||
| Main | Advanced | Security | Power | Boot | Exit | ||
|
| I/O Device Configuration |
| Item Specific Help | ||||
|
|
|
|
|
| |||
Serial port A: |
| [Auto] |
|
|
|
| ||
|
|
|
|
|
|
| ||
F1 | Help | Select Item | Change Values |
| F9 Setup Defaults | |||
Esc | Exit | Select Menu | Enter | Select | X | F10 Previous Values | ||
|
|
|
|
|
|
|
|
|
46