Bypassing Zones
Zones may be bypassed when access is required to part of the protected area when the system is armed. Bypassed zones will not cause an alarm.
Zones may only be bypassed when the system is disarmed.
How to Bypass Zones
To bypass zones, access the security system using the steps described in the Accessing Your Security System section of this manual.
Select a Partition as described in the Accessing Partitions section of this manual.
When the system announces
“To turn Partition One on enter your Access Code. For more options press [✱]”
Press the [✱] Key. The system will announce the list of System Options. When the system announces
“For Zone Bypassing Press [1]”
Press the [1] Key.
If your system requires that you enter an Access Code to bypass zones, the system will announce
“Enter Your Access Code”
Enter your Access Code.
The system will announce the Zone Bypass Menu:
“There are no bypassed zones.
To bypass individual zones Press [3]. To clear all bypassed zones press [4].
To recall the last set of bypassed zones press [5].
To exit press [#]”.
Press [3]... to select individual zones to be bypassed. When [3] is selected, the system will announce
“Zone 1 is not bypassed.
To bypass press [✱].
For the next zone press [1].
For the previous zone press [2].
To exit press [#].”
Press [4]... to clear all bypassed zones. When [4] is selected, the system will announce
“All bypassed zones have been cleared”
The system will then return to the Zone Bypass Menu.
Press [5]... to recall the last set of bypassed zones. If the same zones are bypassed regularly, this feature saves you the time of bypassing each zone individually. When [5] is selected, the system will announce
“The last set of bypassed zones have been recalled”
The system will then return to the Zone Bypass Menu.
Bypassed zones are automatically cleared each time the system is disarmed. For security reasons, your installer may program your system to prevent certain zones from being bypassed.
8
