D A T a s h e e t
The Software House I8, R8, and
The I8 input module provides eight Class A supervised inputs. Three LEDs per input help the installer commission and troubleshoot each input circuit – red if the input is in alarm, green for normal, and yellow for a supervision error. LEDs may be turned off via a DIP switch setting.
The
I8 module by supporting numerous supervised circuit types and EOL resistance values. This allows the
Input/Output Modules
Features That Make a Difference:
Provides
Compatible with full range of Software House® iSTAR and apC access control panels
Locate modules up to 1,220 m (4,000 ft) away from controllers using flexible
Reduces length of sensor and control wiring to save installation costs
I8 provides eight Class A supervised inputs
R8 provides eight Form C relay outputs
Three status LEDs per input (red/yellow/green) and one per output enable quick diagnostics and troubleshooting
Small, modular size requires minimal panel space Dedicated tamper input included on each module Optional
The R8 output module provides eight Form C dry contact relay outputs. A red status LED per output shows the state of the relay.
All modules feature a dedicated input for an external cabinet tamper switch and mount easily in the Software House
The modules are fully compatible with both C•CURE® 800/8000 and C•CURE 9000.