MM-008212-001, Rev. A

39

8.9 BASIC MENU STRUCTURE

Table 8-4 illustrates the basic P5300 OpenSky menu structure. Menu items will vary depending upon

system programming, radio hardware, and optional configurations. All menus except the dwell display

menu can be turned off by network administration personnel.

Table 8-4: Basic P5300 OpenSky Menu Structure

Menu Name Radio Displays

(first and second lines) Usage Notes
To/From Dwell Display
registration, RF sync and
transceiver status codes
Engineering Display
(Menu may not be available
per programming.) bit-error rates
and RSSI data
Displays radio system connection data. For engineering use.
OFF/ON
Silent Emergency “SilentEmerg” Use or to toggle between OFF/ON. Press to
enable.
available modes
Operating Mode
(e.g., OTP, OCF) “Mode Menu” Use or to choose an available mod e. Press and
confirm (Y/N) with or and again.
current latitude and longitude
(degrees:minutes:seconds)
GPS Fix
[e.g., GPS, GPS (Site), GPS
(Aged)] “GPS”
GPS latitude and longitude position of currently tuned-to
base station [“GPS (Site)”] or V-TAC (“GPS”) scrolls across
top line of the display. “GPS (Aged)” indicates VTAC
coordinates haven’t been updated for more that 2 minutes.
User ID # of user currently logged
in
User ID “User ID”
User’s identification/name scrolls across top line of the
display (if programmed).
Radio’s IP address
IP Address “IP Address” Radio’s Intern et Protocol (IP) address scrolls across top line
of the display.
station’s call sign
Station Identification “Station ID” Station’s identification/name scrolls across top line of the
display (if programmed).
“OFF”
Stealth Mode
(display backlight is disabled) “StealthMenu” Use or to turn on. Press any button to turn it off.
“LOW”, “MEDIUM”, “MEDHIGH”,
“HIGH”
Treble Level “Treble Menu”
Use or to choose speaker treble level. Press to
return to dwell display.
“<< >>”
Display Brightness “Bright Menu” Use or to brighten or dim backlighting. Press to
return to dwell display.
“OFF”, “LOW”, “MED”, HIGH”
Side Tone Level “Side Menu” Use or to choose side tone level. Press to return
to dwell display.
See Next Page