MM-008212-001, Rev. A
90
3. Adjust the POWER ON-OFF/VOLUME knob to the desired volume level.
4. Select the desired system and group. The display indicates the current system and group names.
5. The radio is now ready to transmit and receive calls.
10.7 SYSTEM SELECTION
METHOD 1: From the control knob: If system selection is programmed to the
SYSTEM/GROUP/CHANNEL SELECTION control knob, select a system by turning
the knob to the desired system number position (1-16). The display registers the new
system name on line one. The button can be programmed to provide access to a “2n
d
bank” of 16 system number positions (17-32).
METHOD 2: From the keypad: If system selection is programmed as the primary function of
and , select a system by pressing or to scroll through the system list. The
display registers the new system name on line one.
METHOD 3: (P5370 model radios only) Direct Access: Press to enter the system select mode.
Press the numeric key, which is mapped to the desired system. Press . The radio
will move to the selected system.
If system selection is programmed to the Voice group selection knob, direct access to
systems will not be available. Pressing or will scroll through different sets of
16 systems each (banks) if more than 16 systems are programmed into the radio. The
systems within each bank are then selectable via the Voice group selection knob as
described previously in METHOD 1.
Example:
System: 1 = North Group: 1 = Group 1
2 = South 2 = Group 2
3 = East 3 = Group 3
4 = West 4 = Group 4
Press . (South is the currently selected system.)
Press . (Press 4 to select “West” system.)
Press . (West is the newly selected system.)
10.8 GROUP/CHANNEL SELECTION
Several methods can be used to select a new group or channel.
METHOD 1: From the control knob: If group selection is programmed to the Voice Group Selection
knob, select a group by turning the Voice Group Selection knob to the desired group
number position. The display registers the new group name on line two. If the knob is
moved to a position greater than the number of programmed groups, the highes
t
programmed group will remain selected. The
b
utton can be programmed to provide
access to a “2nd bank” of 16 group number positions (17-32)
METHOD 2: From the keypad: If group selection is programmed as the primary function of and
select a group by pressing or to scroll through the group list. The display
registers the new group name on line two.