5.Remove the two door closer inserts (Figure 21, 1) from the existing bottom hinge and install as shown on the new bottom hinge (Figure 20, 1).

6.Remove existing bottom hinge (three screws) and remount on opposite side TOP. Remove hinge screw pin.

7.Remove the plastic hole plug from the top of the door to allow the pivot pin to be inserted in the new location. Install the plug into the vacated hole on the opposite side.

ULIN_0274_A

Figure 22

8.With bottom of door facing up, remove pivot plate (two screws), flip over, and remount on opposite side of door (Figure 22). Be sure slanted side of plate faces center.

9.Holding door upright with top of door tilted forward, place hole of door pivot plate on bottom hinge screw pin/closer inserts (Figure 20, 1).

10.Tilt top of door into position in top hinge and install top hinge screw pin.

11.Install metal hinge screw plugs removed in Step 2 in old hinge holes (three each, top and bottom).

Light Bulb Replacement

To replace the light bulb in your U-Line unit:

2

1

ULIN_0001_A

Figure 23

1.Grasp the edges of the light housing lens

(Figure 23, 1) opposite the exposed tab and gently push the lens toward the tab (Figure 23, 2).

2.Pull the edge of the lens down (Figure 23, 1) and swing it out of the light housing.

IMPORTANT

ALWAYS use a genuine U-Line replacement bulb (P/N 31317) in the light housing. Use of any other bulb within the housing will generate excessive heat, causing damage to the light housing and cabinet interior, and will compromise the precise temperature control of your unit.

3.Replace the bulb only with a genuine U-Line P/N 31317 replacement.

4.Replace the lens by first inserting the tab side back into the housing at a slight angle. While gently pushing the lens towards the tab end, push the free end up into the housing, and release when you will hear a snap/click.

Wine Rack Removal/Installation

To remove a rack from the cabinet:

1.Grasp the end of the rack, and gently slide it out until it stops.

2.Remove any bottles stored on the rack.

ULIN_0207_A

Figure 24

3.Press the left rack release lever (Figure 24) down, and at the same time, lift the corresponding right rack release lever up, and pull the rack out until it is free of the tracks and the cabinet.

IMPORTANT

Do not remove the track side rails from the cabinet.

To insert a rack in the cabinet:

1.Align the left and right rack channels with the tracks in the cabinet, and ensuring an even track engagement on both sides, gently push the rack into the cabinet until it stops.

2.Before reloading the rack, ensure proper operation of the travel stops in the left and right track rails by pulling the rack out gently until it completely stops.

Wood Trim Finishing

The U-Line Wine Captain® is equipped with wood- trimmed wine racks that are coated at the factory with a clear vinyl sealer, which will adequately protect the wood in normal usage. A final finish coat was not applied so that the wood trim could be stained to match décor. The trim on the racks may be coated with a final finish or stained.

2115WC and 2115WCOL2, 2175WC and 2175WCOL2

15

Page 14 Page 16
Page 15
Image 15
U-Line 2115WCOL2, 2175WCOL2 manual Light Bulb Replacement, Wine Rack Removal/Installation, Wood Trim Finishing
Page 14 Page 16

2115WCOL2, 2175WCOL2 specifications

The U-Line 2175WCOL2 and 2115WCOL2 are premium undercounter refrigerators designed to enhance both functionality and style in various settings, including kitchens, bars, and outdoor spaces. As part of U-Line's innovative beverage center offerings, these models stand out for their advanced features, reliability, and versatility, catering to a discerning consumer base.

Both models boast a sleek, contemporary design that seamlessly integrates into existing cabinetry. With a capacity to hold up to 24 cans for the 2175WCOL2 and 15 bottles for the 2115WCOL2, they are perfect for entertaining or simply enjoying a refreshment at home. The adjustable shelving in these units allows for customizable storage arrangements, accommodating a wide range of beverage sizes, from cans to wine bottles.

Temperature control is a hallmark of the U-Line brand, and these models do not disappoint. They feature a temperature range of 34°F to 65°F, ensuring that beverages are stored at optimal conditions. The precision cooling system utilizes an advanced compressor, complemented by a dynamically adjustable airflow system that minimizes temperature fluctuations. This technology keeps drinks at the perfect chill, while also protecting their flavors and freshness.

Another standout feature is the energy efficiency of the U-Line 2175WCOL2 and 2115WCOL2. Both models are ENERGY STAR qualified, reflecting their commitment to environmental sustainability without sacrificing performance. The LED lighting enhances visibility and creates an inviting ambiance, while using less energy than traditional lighting options.

User convenience is central to the design of these undercounter refrigerators. The models come with a door lock option, providing an added layer of security for stored beverages. The intuitive digital control panel allows for straightforward adjustments, making it easy to maintain the desired internal climate.

Overall, the U-Line 2175WCOL2 and 2115WCOL2 are well-engineered, stylish, and functional appliances that cater to modern lifestyles. Their blend of cutting-edge technology, energy efficiency, and customizable storage options makes them a perfect addition to any home, ensuring that beverages are always within reach, perfectly chilled, and ready to enjoy. Whether for personal use or entertaining guests, these undercounter refrigerators deliver reliability and elegance in any setting.
Top Page Image Contents