UL134

Figure 5

2.Carefully bend the water sup- ply line into position and con- nect the line to the solenoid valve (see Figure 6). Avoid kinking the water supply line.

POWER

CORD

WATER LINE

UL201

 

Figure 6

3.For recessed installations, allow extra water supply line length to provide slack for easy removal from the recessed area (see Figure 7). This will also safeguard against kinking the line.

UL200

Figure 7

NOTE

After completing the installation, turn on the water and recheck water and drain connection for leaks. Apply additional tightening if needed. Do NOT use thread sealing compound or tape.

4.Plug in the power cord.

5.Gently push the unit into posi- tion. If desired the unit may be recessed into cabinet or wall.

6.Allow at least 1-1/2" clear- ance behind the unit for elec- trical, water supply and drain connections.

13