User’s Manual
LEVELING THE UNIT
NOTE
It is extremely important that the unit is level. If it is not level, the ice mold will not fill evenly. This can cause a reduction in ice rate, uneven sized cubes or water spilling into the storage area which will cause the ice in the bin to melt pre- maturely. Remember that floors near drains have a tendency to slope towards the drain.
1.Use a level to check the levelness of the ice maker from front to back and from side to side (see Figure 8).
2.If the ice maker is not level, adjust the feet on the corners of the unit as necessary (see Figure 9).
CHECK
LEVEL
UL314
Figure 8
TURN FOOT TO ADJUST | UL205A |
Figure 9
3.Check the levelness after each adjustment and repeat the previous steps until the unit is level.
14