3.Clean the condenser coil using a brush or vacuum cleaner. Do not touch.

4.Position the grille to align the screw holes with the cabinet.

5.Insert the grille screws and tighten being very careful not to overtighten.

SELF CLEANING CYCLE — EVERY 6 MONTHS

To maintain operational efficiency, clean the unit every six months (depending on water conditions more or less frequent cleaning may be necessary). If the ice maker requires more frequent cleaning, consult a qualified plumber to test the water quality and recommend appropriate treatment.

!WARNING

Wear rubber gloves and safety goggles and/or face shield when handling Ice Machine Cleaner.

CAUTION

Use only U-Line Ice Machine Cleaner (part number 41978). It is a violation of Federal law to use this solution in a manner inconsistent with its labeling. Use of any other cleaner can ruin the finish of the evaporator and will void the war- ranty. Read and understand all labels printed on the package before use.

U-Line ice machine cleaner is used to remove lime scale and other mineral deposits. Refer to the following steps to initiate the self- cleaning cycle.

CAUTION

Never use anything to force ice from the evaporator. Damage may result.

31