User’s Manual

LEVELING THE UNIT

It is extremely important that the unit is level. If it is not level, the water will not flow over the ice mold evenly. This can cause a reduction in ice rate, uneven sized cubes or water spilling into the storage area which will cause the ice in the bin to melt prematurely. Remember that floors near drains have a tendency to slope towards the drain.

1.Use a level to check the levelness of the ice maker from front to back and from side to side for free-standing installation (Figure 9).

Use a level to check the levelness of the icemaker from front to back and from side to side by placing a level on the inside edge and along the door seal edge for built-in installation (Figure 10).

FRONT

SIDE

CLRCO029

 

 

 

CLRCO006

 

Figure 9

Figure 10

(Free-Standing Installation)

(Built-In Installation)

14