5.Remove existing bottom hinge (3 screws) and remount on opposite side TOP. Remove hinge screw pin.
6.With bottom of door facing up, remove pivot plate (2 screws), flip over, and remount on opposite side of door (Figure 17).
UL319
Figure 17
7.Holding door upright with top of door tilted forward, place hole of door pivot plate on bottom hinge screw pin (Figure 18). Be sure that the bosses on the closers align with holes in hinge and hinge plate.
8.Tilt top of door into position in top hinge and install top hinge screw pin.
9.Install plastic screw plugs removed in Step 2 in old hinge holes (3 each, top and bottom).
BOSS
CLRCO008
Figure 18
17