4.If door edge opposite the hinges needs to move up, move plate toward outside of door. If door edge needs to move down, move plate toward inside of door (Figure 21). Repeat until top edge of door is parallel with top of cabinet and tighten screws securely.

SLOTTED

NOTCH

MOUNTING

 

HOLES

 

RAISE

LOWER

OUTSIDE

OUTSIDE

DOOR EDGE

DOOR EDGE

DOOR CLOSERS

CLRCO001a

Figure 21

5.After adjustment is complete, remove the door closers from the bottom hinge, clean thoroughly and apply petroleum jelly to the mating surfaces of the closers (Figure 22). Be sure that bosses on closers align with holes in hinge and hinge plate. Mount door and install top hinge pivot pin.

BOSS

UL312

Figure 22

19