Adjustment/Installation

1.To move to a different position in the unit, insert shelf at an angle, approximately 15-20°, over the rib in the side of the unit where you want to place the shelf. The shelf must be started into the unit at an angle to clear the door.

2.Continue to slide the shelf into the unit at an angle until it clears the door. Lower the shelf and rest it on the rib.

DOOR SHELF REMOVAL/INSERTION

To Remove Door Shelf (Figure 35):

1.

Grasp shelf in center, lift

NOTCH

 

slightly, and tilt 15°-20°.

 

2.

Carefully pull shelf off bosses.

 

To Install Door Shelf:

1.Holding shelf in center, align notches in shelf with bosses in door.

2.Tilt shelf at a 15°-20° angle and slide onto bosses at the desired location.

Figure 35

BOSS

CLRCO010

29