1

Install bottom hinge:

1.If you have a plate hinge, reorient the pivot screw so it protrudes the opposite direction form the hinge. Remove the pivot screw from the hinge. Turn the plate over and reinstall the screw.

2.Align hinge outer edge with cabinet. For models with a plate hinge, the flat edge of the hinge alignes with the outer edge of the cabinet.

Install two or three screws, depending on model. Replace nuts if used.

Prepare door for reinstallation:

For black or white doors:

1.Remove plastic hole plug from top of door handle and reinstall on opposite side.

2.Remove plastic hinge bushing on bottom of door and reinstall on opposite side. Clean out bushing hole in door bottom with a screwdriver if necessary.

 

3

 

 

 

4

 

 

2

 

Install top hinge, and door:

1

1.

Reorient the pivot screw so it protrudes the opposite

 

 

 

 

direction from the hinge. Remove the pivot screw from the

 

 

 

hinge. Turn the plate over and reinstall the screw.

 

 

2.

Hold door to keep it from falling.

 

Prepare door for reinstallation:

3.

Lift the door on to the bottom hinge.

 

For stainless steel models with glass doors:

4.

Align flat edge of the hinge with the outer edge of the unit.

 

3. Stainless glass doors are flipped upside down to be reversed.

5.

Install three or four screws, depending on model.

 

4. Lay the door on it’s side. Remove the plastic hole plug (1) and

Align and adjust the door:

 

install in the corner opposite of where it was removed.

1.

Align and adjust the door, see DOOR ALIGNMENT AND

 

 

 

5. Remove the plastic hinge bushing (2) and install in the corner

 

ADJUSTMENT above.

 

opposite of where it was removed.

Install grille:

 

 

6. Remove the U-Line nameplate (3) from door. This will reveal

Install the grille, see MAINTENANCE section of this guide.

mounting holes for the door actuator bracket.

 

7.Remove door actuator (4) from door. Be sure to only remove the two screws holding the actuator to the door. Reinstall the actuator (4) on the opposite end of the door where the nameplate was removed.

8.Install new nameplate where the actuator assembly was removed.

9.Install screws into holes on opposite side, where the hinge was removed. Replace nuts if used.

U-Line Standrd Door Alignment and Reversal

10

Page 12 Page 14
Page 13
Image 13
U-Line SP18 Install bottom hinge, Prepare door for reinstallation For black or white doors, Install top hinge, and door
Page 12 Page 14

SP18, CO1175 specifications

U-Line has been a pioneer in the field of undercounter refrigeration, and its SP18, BI98, and BI95 models stand out for their exceptional performance, innovative technologies, and versatile designs, making them highly sought after by both homeowners and professionals alike.

The U-Line SP18 model is crafted for those seeking a compact yet powerful solution to enhance their kitchen or entertainment area. This unit is designed to hold up to 42 cans, with a storage capability that can handle various beverages. One of the standout features is its digital temperature control that enables precise adjustments ranging from 34°F to 65°F, ensuring that your beverages are served at optimal temperatures. The glass door is an aesthetically pleasing element that also offers UV protection, preventing the degradation of your drinks due to light exposure.

Transitioning to the BI98 model, this unit is designed for built-in applications, allowing for seamless integration into cabinetry. The BI98 boasts an impressive capacity of 98 cans, making it ideal for larger gatherings or for households that stock up on beverages. One of its key technologies is the dual-zone cooling system, which allows users to independently control the temperatures in two separate sections, catering to different types of beverages at their ideal serving temperatures. This flexibility is especially beneficial for parties or when hosting multiple guests.

The BI95 is another remarkable addition to U-Line's lineup, designed specifically for those who prioritize versatility and efficiency. This model offers a slightly smaller capacity than the BI98, capable of holding around 95 cans. However, it compensates with advanced features like energy-efficient IntelliCold technology. This ensures that the compressor runs only when needed, maintaining consistent temperatures while minimizing energy consumption. The BI95 also features a sleek stainless-steel finish and a reversible door, enhancing its adaptability to various kitchen layouts and styles.

All three models come equipped with LED lighting that beautifully illuminates the interior, allowing for easy visibility and selection of beverages. The quiet operation of these models ensures that they can be placed in any living space without disruptive noise. U-Line's commitment to quality and functionality is evident across the SP18, BI98, and BI95, making these models staples for modern kitchens and entertainment spaces. Their combination of aesthetics, innovative technologies, and thoughtful design provides an unparalleled experience in beverage preservation and accessibility.
Top Page Image Contents