Manuals / U-Line / Kitchen Appliance / Ice Maker

U-Line CO2075FF manual Checking Door Alignment, Adjusting Door Alignment, Adjust Door

Models: CO2075FF

1 17
Download 17 pages 36.36 Kb
Page 12
Image 12

CO2075FF — Ice Maker/Refrigerator

™

 

 

 

5 Adjust Door

Checking Door Alignment

The unit’s door is aligned at the factory before shipment. However, its alignment could have been disturbed during shipment or during door panel installation.

IMPORTANT

Properly aligned, the door should be 1/8" below the top of the unit’s cabinet, NOT flush with the top (see Figure 26).

1/8"

Figure 26

1.Compare the top edge of the door to the top edge of the cabinet.

2.If the door edge is 1/8" below and parallel to the top of the cabinet, go on to 6 Prepare Plumbing. If it is not, note whether the side opposite the hinge needs to be moved UP or DOWN, and use the following procedure.

Note: If door is adjusted correctly, but panel is not square with the adjacent cabinets, slight adjustments can be made by drilling the holes in the vinyl coated steel panel slightly oversized. See Figure 21 on Page 10.

Adjusting Door Alignment

Slotted

 

Mounting

Notch

Holes

 

Raise

Lower

Outside

Outside

Door Edge

Door Edge

Figure 28

 

3.See Figure 28. If the top far edge of the door needs to move UP, move the hinge plate toward the outside of the door and retighten screws. If the top far edge of the door needs to move DOWN, move the hinge plate toward the inside of the door and retighten screws.

4.Mount the door to recheck alignment and repeat Steps 2 and 3 if further adjustment is necessary.

5.When top edge of door is parallel to top edge of cabinet, remove the door and ensure the two screws are secure.

6.Remove the door closers from the bottom hinge, clean thoroughly and lubricate the mating surfaces with petroleum jelly.

7. Reinstall the closers, lining

up the bosses with holes in

hinge and hinge plate (see

Figure 29).

1.Remove top hinge screw pin (7/64" Allen wrench or Phillips screwdriver, depending on your unit’s construction, see Figure 27). Remove door by tilting forward and lifting off bottom hinge pin.

2.With door upside-down, loosen but do not remove the two screws on the door’s bottom hinge plate.

Figure 27

8. Mount the door, install top

hinge pivot pin and go on

to 6 Prepare Plumbing.

Door

Closer

Inserts

Boss

Figure 29

www.U-LineService.com

12

02/2005

Page 11 Page 13
Page 12
Image 12
U-Line CO2075FF manual Checking Door Alignment, Adjusting Door Alignment, Adjust Door, To 6 Prepare Plumbing
Page 11 Page 13

CO2075FF specifications

The U-Line CO2075FF is an elegantly designed, all-refrigerator unit that caters to those who appreciate both aesthetics and functional efficiency in their kitchen appliances. This compact model boasts a sleek finish that seamlessly blends with any modern kitchen decor, making it not only a practical addition but also a stylish one.

One of the main features of the U-Line CO2075FF is its remarkable storage capacity relative to its size. With a spacious interior that can accommodate up to 75 cans, the refrigerator is engineered to maximize utility in confined spaces. This makes it an ideal choice for apartments, smaller homes, or even as a supplementary refrigerator in larger kitchens.

The U-Line CO2075FF is equipped with innovative technologies that enhance its functionality. The unit features a state-of-the-art convection cooling system that ensures rapid temperature recovery and consistent temperature distribution throughout the refrigerator. This technology is essential for preserving the freshness of food and beverages, particularly in environments where the refrigerator door is frequently opened.

In terms of temperature control, the U-Line CO2075FF offers a user-friendly digital interface that allows for precise adjustments. Users can easily set the temperature to their desired level, ensuring that their items are stored under optimal conditions. The refrigerator also includes a powerful compressor that operates quietly, minimizing disruption in the home environment.

Another characteristic that sets the U-Line CO2075FF apart is its LED interior lighting. The energy-efficient lights not only illuminate the contents for easy visibility but also contribute to the overall energy efficiency of the unit. Moreover, this refrigerator comes with adjustable shelving, allowing users to customize the interior layout to accommodate items of various sizes, from tall bottles to small jars.

For those who prioritize energy savings, the U-Line CO2075FF is Energy Star certified, meaning it operates with reduced energy consumption without sacrificing performance. This commitment to sustainability makes it an attractive option for eco-conscious consumers.

In summary, the U-Line CO2075FF is a well-rounded refrigerator that combines style, efficiency, and advanced technologies. Its thoughtful design, superior cooling capabilities, and user-friendly features make it a standout choice for anyone looking to enhance their kitchen with a reliable and aesthetically pleasing refrigeration solution.