CO2075FF — Ice Maker/Refrigerator

 

Side-By-Side Installation

Instructions

For a complete refreshment center, install your CO2075FF Ice Maker/Refrigerator beside a U-Line Drawer or Wine Captain Model (see Figure 11 for typical cut-out). Note that each Side-By-Side Installation will be different.

Cut-out width for a side-by-side installation is the total of the widths listed under Cut-Out Dimensions in each unit’s Installation Guide.

For example:

Placing a CO2075FF Ice Maker/Refrigerator next to a

2015 series unit would require a cut-out width of:

24-3/16" + 15-3/16" = 39-3/8"

Placing a CO2075FF Ice Maker/Refrigerator next to a

2075 series unit would require a cut-out width of:

24-3/16" + 24-3/16" = 48-3/8"

No trim kit is required. However, 1/4-inch space needs to be maintained between the units to ensure unobstructed door swing.

Units must operate from separate, properly grounded electrical receptacles placed according to each unit’s Electrical Specifications.

Typical Side-By-Side Cut-Out

 

34-1/4"

23-11/16"

to

 

35-1/8"

7"

 

1/4" Space

 

Between

1-1/2"

Appliances

 

Figure 11

 

4 Prepare and Install Door Panel

(Black and White Units Only)

Two types of custom door panels can be installed on your Black or White unit to harmonize with or accent the surrounding décor: a Custom 1/4" Insert or a Full Overlay. If no custom door panel is used, go on to 5 Adjust Door.

Custom 1/4'' Door Panel Insert

Door Panel Preparation

A custom door panel can be inserted into the doorframe. Custom door panels can be flat or raised, as long as the maximum panel thickness where inserted into the door reveal (channel) is 1/4"-thick. For raised panels, the depth of the reveal is 1/4" on all four sides.

IMPORTANT

Raised panels will reduce the door’s 90° swing/zero clearance if the unit is installed next to a wall or similar type of structure (see Page 5).

Cut the panel insert to the following dimensions.

Custom 1/4" Dimensions:

Width: 23-1/32"

Height: 28-5/32"

The door panel must not weigh more than 20 lbs.

Door Panel Installation

Install the insert as follows:

1.Remove the door shelves by first pulling shelves

up at a 45° angle then straight out (see Figure 37 on Page 15).

CAUTION

Use care when handling the insert. Insert edges may be sharp.

2.Remove top hinge screw pin (7/64" Allen wrench or Phillips screwdriver, depending on your unit’s construction, see Figure 12). Remove door by tilting forward and lifting off bottom hinge pin.

02/2005

7

www.U-LineService.com

Page 7
Image 7
U-Line CO2075FF manual Side-By-Side Installation Instructions, Custom 1/4 Door Panel Insert, Prepare and Install Door Panel

CO2075FF specifications

The U-Line CO2075FF is an elegantly designed, all-refrigerator unit that caters to those who appreciate both aesthetics and functional efficiency in their kitchen appliances. This compact model boasts a sleek finish that seamlessly blends with any modern kitchen decor, making it not only a practical addition but also a stylish one.

One of the main features of the U-Line CO2075FF is its remarkable storage capacity relative to its size. With a spacious interior that can accommodate up to 75 cans, the refrigerator is engineered to maximize utility in confined spaces. This makes it an ideal choice for apartments, smaller homes, or even as a supplementary refrigerator in larger kitchens.

The U-Line CO2075FF is equipped with innovative technologies that enhance its functionality. The unit features a state-of-the-art convection cooling system that ensures rapid temperature recovery and consistent temperature distribution throughout the refrigerator. This technology is essential for preserving the freshness of food and beverages, particularly in environments where the refrigerator door is frequently opened.

In terms of temperature control, the U-Line CO2075FF offers a user-friendly digital interface that allows for precise adjustments. Users can easily set the temperature to their desired level, ensuring that their items are stored under optimal conditions. The refrigerator also includes a powerful compressor that operates quietly, minimizing disruption in the home environment.

Another characteristic that sets the U-Line CO2075FF apart is its LED interior lighting. The energy-efficient lights not only illuminate the contents for easy visibility but also contribute to the overall energy efficiency of the unit. Moreover, this refrigerator comes with adjustable shelving, allowing users to customize the interior layout to accommodate items of various sizes, from tall bottles to small jars.

For those who prioritize energy savings, the U-Line CO2075FF is Energy Star certified, meaning it operates with reduced energy consumption without sacrificing performance. This commitment to sustainability makes it an attractive option for eco-conscious consumers.

In summary, the U-Line CO2075FF is a well-rounded refrigerator that combines style, efficiency, and advanced technologies. Its thoughtful design, superior cooling capabilities, and user-friendly features make it a standout choice for anyone looking to enhance their kitchen with a reliable and aesthetically pleasing refrigeration solution.