U-Line CO2175RF manual Door Reversal, CO2175FF, 2175RF

Door Reversal

ULIN_0015_A

Figure 19

Black and white units may be left- or right-hand opening. Stainless steel unit doors cannot be reversed. The doors are easily reversed by moving the hinge hardware to the opposite side. The top hinge hardware will be used on the bottom of the other side and the bottom hinge hardware will be used on the top of the other side (Figure 19).

To reverse the door:

1

2

ULIN_0003_A

Figure 20

1.Remove top hinge screw pin (Figure 20, 1) from door using a Phillips screwdriver. Remove door by tilting forward and lifting off bottom hinge pin.

1

ULIN_0002_A

Figure 21

2.Remove plastic screw plugs (three each, top and bottom) (Figure 21, 1) from new hinge location. Do not discard.

3.Remove top hinge (three screws) (Figure 20, 2) and reinstall hinge screw pin (Figure 20, 1).

1

ULIN_0005_A

Figure 22

4.Install the removed top hinge mount on opposite side BOTTOM (Figure 22).

1

ULIN_0004_A

Figure 23

CO2175FF, 2175RF 15