NOTE
After completing the installation, turn on the water and recheck water connection for leaks. Apply additional tightening if needed. Do not use thread sealing compound or tape.
4.Plug in the power cord.
5.Gently push the unit into position.
GRILLE INSTALLATION
1.With a standard blade screwdriver (or 1/4” nutdriver), remove the grille screw to attach the grille (Figure 11).
GRILLE SCREW
UL106
Figure 11
2.Remove the control knob by pulling it toward you.
3.Identify the small screw hole located toward the top of the middle recessed section of the grille.
15