95 AND 98 MODELS

1.With a standard blade screwdriver (or 1/4" nutdriver), remove the screw needed to attach the grille (see Figure 13).

2.Carefully remove the grille from inside the unit. Locate the screw hole at the top, middle recessed section of the grille.

3.Place the two hook-hinges (located on the rear bottom side of the grille) on the front lip of the unit base. Swing the grille up into position, aligning the grille and cabinet screw holes (see Figure 14).

UL501

Figure 13

GRILLE SCREW

UL502

Figure 14

4.Insert the screw, being careful not to over tighten.

17