User’s Manual

INITIAL START-UP AND ADJUSTING

THE TEMPERATURE CONTROL

U-Line recommends the unit be allowed to run overnight and make ice on ice-maker models prior to loading with product.

It is possible that dirt or scale will dislodge in the water line. Always throw away all ice cubes made during the first two to three hours of operation.

Once the installation is complete, the unit is ready for initial start-up and operation.

NOTE

BI-95 and BI-98 models have the ON-OFF switch behind the front grille. A small opening in the top of the grille is provided to access the switch (Figure 36).

Some models may also turn off when the temperature control is turned all the way toward warmer until it stops (clicks).

OFF

ON

UL127A

Figure 36

1.Wipe out inside of unit, again, with a clean, water-dampened cloth.

2.Plug the appliance cord into a 115V polarized, grounded electrical outlet.

3.Check that the ON-OFF switch in the ON position. (All units are shipped in the ON position.)

34