Allow unit temperature to stabilize for 24 hours before use.

4.Open the water supply valve in the main water source. As soon as the ice maker mold reaches the proper temperature, the ice maker mechanism will fill the mold with water. The first cubes may be small because of air in the water line. Subsequent cubes will be of standard size. Approximate time for the first cycle is 45 min- utes. Allow two hours for Frostfree models.

TEMPERATURE CONTROL

Models BI-95 and BI-98: Use a flat tip screwdriver to turn adjusting screw, located behind front grille, clockwise for colder (slower ice production) or counterclockwise for warmer (faster ice production) (Figure 37).

C O

L

 

R

E

D

 

CONTROL

 

4

5

3

 

 

2

 

6

 

 

1

 

7

 

 

UL012A

UL504

 

Figure 37

Figure 38

Series 15, 29 and 75: Adjust control setting by turning the numbered dial (Figure 38).

NOTE

Model SP18 temperature control has been preset at the factory for optimum ice production. Do not attempt to make adjustments.

35