Food Storage Chart
Mode | Foodstuffs | |
|
| |
Deli/ | Meats, Fish, Cheeses, Dairy, Butter, Garlic, Oils, | |
Meats | Nuts, Condiments | |
Fresh | Fruits, Vegetables, Berries, Lettuce | |
Pantry | Dry Goods, Breads, Baking Items, Spices, | |
Seasonings | ||
| ||
| Root Vegetables, Potatoes, Onions, Lemon, Lime, | |
Vegetable | Melon, Peppers, Beans, Cucumber, Cut | |
| Vegetables | |
|
|
The 3090 Models have two independently controlled zones. Each zone may have its own mode and set point. The 3045 models have a single zone. Available Mode Settings will vary with model.
1.In order to adjust temperatures in the 3090WCWC you must first select a Zone to adjust. To select, press Zone Toggle 
. The left side Mode Setting will flash. Pressing Zone Toggle 
again will select the right side and the right side Mode Setting will flash. For 3045 Models simply press Select 
to alter Mode Settings.
2.Pressing Select 
will cycle through the available modes for your model. Reference the Mode Settings Chart on page 4 for each Setting’s default set point and range.
3.Once your have selected your desired Mode the default set temperature will display. You may further fine tune the temperature by pressing Up 
or Down 
.
Quick Chill
!CAUTION
A number of zones include a quick chill feature. Quick chill is designed to quickly pull warm drinks and foods down to optimum storage temperature. It is important to only initiate quick chill modes when the Refrigerator or Wine Captain® have been fully laden with warm product. Failure to follow this notice could result in food or drinks that are cooled to a point below optimum or frozen.
The following table lists modes which include the quick chill feature and the time which quick chill will run.
Mode | Run Time | |
|
|
|
Drink Cabinet | 4 | Hours |
Deli/Meat | 5 | Hours |
Fresh | 4 | Hours |
Pantry | 4 | Hours |
Red Wine | Not Available | |
Vegetable | 1 | Hour |
Sparkling | 1 | Hour |
White Wine | 1 | Hour |
|
|
|
To Initiate quick chill.
1.In 3090WCWC model use Zone Select 
to select the desired zone, left or right.
2.Press Select 
to select the desired mode setting.
3.Press Down 
until the temperature set point reads “Quick”.
The quick chill feature will then begin for the period of time dictated by the mode type. To cancel quick chill, simply select a set point other then “quick”.
Note: There may be a delay before quick chill is activated in 3090 models. If the opposite zone is currently in a cooling cycle while quick chill is selected, the cooling cycle on the opposite zone will first be completed.
Note: Please note, that when quick chill is activated in a 3090, the zone opposite the active quick chill zone will not return to a cooling cycle until quick chill is complete. If storing product in the opposite zone it is important to limit the number of times the door is opened in the zone not currently under quick chill.
Interior Lighting
Your
3090 Model
Up | Zone Indicator | Zone Toggle |
Zone Indicator | Select | |
|
| |
| ||
LIGHTING | LEVEL |
|
ON WITH DOOR | HIGH |
|
3090 Model Display Shown |
| |
|
| Power |
Down | ||
1.To begin, press 
to enter the lighting menu.
2.In 3090 Models the unit initially defaults to control the lighting in both Zones simultaneously. To select a single zone press Zone Toggle 
. Notice the arrows on top of the display changing state. Pressing Zone Toggle 
once will select the left side zone, pressing it again will select the right side zone, pressing it a third time will select both zones again.
3.Use Up 
or Down 
to cycle through each available brightness setting; Low, Medium, or High.
4.Use 
to cycle through each available timer setting. Selections include “On With Door”, “On 3 Hours”, “On 6 Hours”, or “On 24 Hours”.
5.To exit, press Select 
or simply wait for the menu to time out.
5 |
