Powering On Your 2200 Series POS Bundle System
1.Remove the plastic protective sheets from the LCD Monitor and the optional customer display.
2.Turn on the ATX PC power by depressing the on/off switch located on the front
3.To activate the printer, turn on the printer rocker switch located on the front of the printer.
4.To activate the monitor, depress the on/off switch located on the lower right hand side of the monitor bezel.
You have completed the installation of UTC RETAIL’s 2200 Series Bundled Point of Sale System. If you experience problems with any of the components of the 2200 Series Bundled POS System, see the “Troubleshooting Procedures” section below.
© 2008 UTC RETAIL. All rights reserved. | 11692012 Rev D | Page 11 of 12 |