SAFETY TIPS

PROTECTION AND LOCATION OF YOUR TELEVISION

16-1. If an outside antenna is connected to the television, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, NFPA No. 70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit

connection to grounding electrode, and requirements for the grounding electrode.

16-2. Note to CATV system installer:

(Only for television with CATV reception). This reminder is provided to call the CATV system installerÕs attention to Article 820- 40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ELECTRIC

SERVICE EQUIPMENT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUNDING CONDUCTORS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC PART 250 PART H)

NEC NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS.

17.An outside antenna system should not be located in the vicinity of overhead power lines or other electrical lights or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

18.For added protection for the television during a lightning storm, or when it is unused for long periods of time, unplug it from the wall outlet and disconnect antenna. This will prevent damage due to lightning and power-line surges.

OPERATION OF YOUR TELEVISION

19.This television should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply at your home, consult your dealer or local power company.

20.If the television does not operate

 

normally by following the operating

 

instructions, unplug the

television

Use

from the

wall

outlet

and

refer

Proper

servicing

to

qualified

service

Voltage

personnel.

Adjust

only

those

 

controls that are covered in the instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified service technician to restore the television to normal operation.

21.If your television is to remain unused for a period of time, (such as when going on a holiday), turn

?the television OFF and unplug it from the wall outlet.

IF THE TELEVISION DOES NOT OPERATE PROPERLY

22. If you

are unable to restore

 

23. Whenever the television is

normal

operation by

following

 

damaged or fails, or if there is a

the detailed procedure

in

your

Service

distinct change in performance

operating instructions,

do

not

 

that indicates a need for service,

attempt any further adjustments.

 

unplug the television and have it

Unplug the television and call

 

checked by a qualified service

your dealer or service technician.

 

technician.

24.It is normal for some televisions to make occasional snapping or popping sounds, particularly when being turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your dealer or service technician.

Snap

Pop

PopSnap

FOR SERVICING AND MODIFICATION

25.Do not use attachments not recommended by the television manufacturer as they may cause hazards.

26.If replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

27.Upon completion of any service or repairs to the television, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition.

ask me!

PICTURE CAUTIONS

Picture Burn Prevention

¥Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to projection television receivers. Such ÒPATTERN BURNSÓ constitute misuse and are NOT COVERED by your HITACHI Factory Warranty.

¥When using Picture-in-Picture function, the sub-picture should not be left permanently in one corner of the screen or a ÒPATTERN BURNÓ may develop over a long period of time.

Public Viewing of Copyrighted Material

Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require prior authorization from the broadcaster or owner of the video program material.

4

Page 3 Page 5
Page 4
Image 4
Ultratec 43FDX11B, 61UDX10B, 53UDX10B, 43FDX10B important safety instructions Picture Cautions
Page 3 Page 5

53UDX10B, 61UDX10B, 43FDX10B, 43FDX11B specifications

The Ultratec 43FDX11B, 43FDX10B, 61UDX10B, and 53UDX10B are high-performance digital displays designed for various applications, catering to both commercial and residential needs. These models embody advanced technology and features, providing users with an exceptional viewing experience.

One of the standout features of the Ultratec series is their use of 4K Ultra HD resolution, which delivers stunning clarity and detail. With a resolution of 3840 x 2160 pixels, users can expect crisp images and vibrant colors, making them ideal for presentations, advertisements, or home entertainment. Each model is optimized to render dynamic visuals, ensuring that content looks sharp even in fast-paced environments.

In terms of connectivity, the Ultratec displays come equipped with multiple HDMI ports, USB interfaces, and options for wireless connectivity. This versatility allows users to connect various devices, including laptops, media players, and gaming consoles, simplifying the process of sharing and displaying content.

The series also incorporates advanced LED technology, providing enhanced brightness and contrast ratios. This results in improved visibility even in well-lit spaces, allowing content to be viewed comfortably without straining the eyes. Additionally, the energy-efficient design helps reduce power consumption while still delivering high-quality performance.

Another significant characteristic is the user-friendly interface. The Ultratec displays are designed with intuitive controls, making navigation easy. The inclusion of smart features such as built-in applications for streaming and access to various platforms allows users to enjoy their favorite content without the need for additional devices.

The Ultratec 43FDX11B and 43FDX10B models are particularly suited for compact installations, offering a 43-inch display size that fits well in smaller spaces while not compromising on performance. On the other hand, the 61UDX10B and 53UDX10B cater to larger environments, providing expansive viewing experiences ideal for presentations and public displays.

Overall, the Ultratec 43FDX11B, 43FDX10B, 61UDX10B, and 53UDX10B are versatile, high-quality displays that merge innovative technology with user-centric design. Their combination of stunning visuals, efficient performance, and connectivity options makes them a standout choice for users seeking reliability and excellence in digital display technology. Whether for business or leisure, these models promise to elevate any viewing experience to new heights.
Top Page Image Contents