Underwater Kinetics manual 4AA Mini Q40 eLED PLUS LIGHT, Instructions & Important Information

4AA Mini Q40 eLED PLUS LIGHT

Instructions & Important Information

Thank you for purchasing this	with UK’s projection optics
Underwater Kinetics Scuba	to provide you with reliable
Diving light. It utilizes the lat-	high efficiency lighting.
est LED technology along

Limited Lifetime Warranty

UK International products are engineered for maximum performance and durability.

Bezel

Lens

(convex curve toward bezel)

Batteries can vent hydrogen gas and possibly cause an

For over a 30 years, UK has been designing and manu- facturing scuba lights to enhance the diving experi- ence. We believe that it is important to take at least one light on every dive just to see the incredible beauty that lies hidden in the shadows under coral and rocks. Our lights are the standard for scuba divers around the world. We have designed all of our lights to be incredibly bright, rugged, compact, and waterproof to at least 500 feet. You can be assured that each light includes the latest technology and is the bright- est, smallest and most pow- erful in its class. With mini- mal care your Underwater Kinetics light will give you years of trouble-free service.

Battery Installation

To install batteries, hold the case in the position shown. Drop the batteries one by one into the case in the order shown. Make sure that the

(+)end of the battery is down for 1 and 2 and up for batter- ies 3 and 4. Next insert the lamp module into the case. Place the bezel over the lamp module and screw it onto the case.

ON / OFF

eLED Lamp Module

The eLED module is an inte- grated unit. There are no replaceable parts . In addi- tion to the LED itself, the module contains an electron- ic circuit which helps to maintain constant brightness as the batteries are dis- charged. Flashlights with standard filament lamps loose brightness steadily as the batteries are consumed.

Beam In And Out-Of-Water The front element of the Projection Optics System allows the 13° out-of-water beam angle to expand to almost 20° in-water for hotspot free illumination of close-up subjects. The high color temperature or daylight quality of the light beam allows light to travel farther underwater, due to less absorption than that which occurs with light from stan- dard filament lamps.

O-Ring Seal

The O-ring and sealing sur- faces must be kept clean and lubricated with silicone grease in order to maintain the watertight seal and smooth rotation of the bezel. During cleaning remove the O-ring with your fingers. Do

All products carry a Limited Lifetime Warranty to the orig- inal retail purchaser to be free from defective material and workmanship under nor- mal and intended use. In addition, the UK International Limited Warranty covers materials used in its products to the original purchaser, from the date of purchase, as follows: plastics for 10 years; fabrics and rubber for 3 years; rechargeable batteries for 90 days; and lamps for 30 days (batteries and lamps are not manufactured by UK International).

In the event the original retail purchaser detects a defect in the material or workmanship, the product along with proof of purchase date should be returned to an authorized UK International dealer or directly to UK International with the postage prepaid. UK International agrees to repair or replace at UK International' sole discretion any product found to be defective in material or work- manship within the time peri- od specified above. For the complete Limited Lifetime Warranty write to UK International.

Address all correspon- dence and returns to:

UK International

14850 eLED plus Lamp Module

	4
	Four
	Alkaline
	AA-Size
2	(LR6)
	Batteries
	3

Note:	1
The Mini Q40 eLED
Plus will not light if	O-Ring
the batteries are not
inserted with the
polarity as shown.

MQ40 eLED Plus stays bright

explosion if they are (1) installed without the proper polarity, (2) not the same type, brand name and age or (3) completely discharged.

>Load batteries according to the diagram.

>Discard all batteries as soon as they are drained or no longer produce light.

>Do not mix batteries of different type, brand or age.

Care and Maintenance

■Keep area around the O-ring clean.

■If the light floods, empty it immediately, rinse with fresh water and dry com- pletely before reassembly.

■Replace the reflector/lamp, which con- tains a hydrogen absorbing catalyst, if it gets wet.

■Do not store batteries in the light for long periods of time; they may leak and damage the light.

To operate the Mini Q40 eLED Plus screw the bezel down by twisting clockwise until the lamp comes ON. Turn the light OFF with at least 1-1/2 counter-clockwise turns of the bezel.

not use tools which can dam- age the O-ring and sealing surfaces.

13400 Danielson Street

Poway, CA 92064

Mini Q40

eLED Plus Case

©2006 UK International 400135 rev. 9/15/06