Setup

Installation

Install the window/door sensor in the same position where proper operation was confirmed (page 11). You can install the window/door sensor using screws or double-sided tape, depending on your preference or the material of the installation area.

Note:

RWhen installing, make sure the battery is inserted properly and the sensor unit cover is completely closed.

RUse screws when installing on a wooden surface. Do not use double-sided tape.

Securing with screws

1Remove the covers from each unit.

R Lift from the indented area (A) and open the sensor unit cover (B).

2 2

1 1

14For assistance, please visit www.panasonic.com/support

Page 14
Image 14
Panasonic KX-HNS101 manual Installation, Securing with screws