Appendix
Testing the window/ door sensor
You can check the window/door sensor’s LED indicator and test the performance of the window/door sensor.
1Remove the sensor unit cover.
2 Press M
N on the sensor unit.
3Open and close the window or door several times.
R Make sure that the LED indicator lights in green when you close the window or door.
4Press M
N again.
Note:
RIf the LED indicator lights in red when the window or door is closed, the window/door sensor is not installed properly.
Features available when using the [Home Network] app
Some of the window/door sensor’s features that are available when using the [Home Network] app are listed below. For more information, refer to the User’s Guide (page 17).
–Security system
You can use the app to arm and disarm the security system, confirm the current status of the sensor, and view a log of previous security events.
–Home control
You can configure the window/door sensor to trigger other system events, such as camera recording, turning on an electric device (such as a lamp), etc. (Appropriate device required.)
–Telephone alert
You can configure the system to call a preprogrammed phone number when the window/door sensor is triggered.
Accessing the User’s Guide
The User’s Guide is a collection of online documentation that helps you get the most out of the [Home Network] app.
1iPhone®/iPad®
Tap 
in the app’s home screen.
Android™ devices
Tap 
or press your mobile device’s menu button in the app’s home screen.
2Tap [User’s Guide].
Note:
RYou can also access the User’s Guide at the web page listed below.
www.panasonic.net/pcc/support/tel/
homenetwork/manual/
For assistance, please visit www.panasonic.com/support | 17 |
